Overview
The Pro Comp 6 Inch Lift Kit with Pro Runner Shocks, part number K2062BP, is a 6-inch knuckle lift for the 2006-2008 Dodge Ram 1500. It is a direct fit and needs no steering correction, with a lift height range of 5 to 6.99 inches.
The front lift uses spindles and knuckles, with front and rear crossmembers and compression struts. Front sway bar spacers and bump stop extensions are included. The rear uses lift blocks and U-bolts, and the kit comes with extended-length brake lines.
The front shocks are reused OEM units, not Pro Runner shocks. Confirm the front shock setup before installing the kit.
Key features
- 6-inch stage 1 knuckle lift
- Front spindles and knuckles
- Front and rear crossmembers
- Compression struts
- Front sway bar spacers
- Bump stop extensions
- Extended-length brake lines
Front geometry on a knuckle lift
A knuckle lift replaces the front spindles and knuckles, so the front wheel angles, steering linkage position and driveshaft angles all change. Compression struts control how the axle is located under braking and acceleration, which means their bushings carry more load than stock. Check the struts and crossmembers for sag and listen for clunks over bumps during the first weeks of driving.
Extended brake lines and sway bar spacers are often the first parts to show stress. Look for kinks, rubbing or stretched lines, and confirm the sway bar links still move freely. Bump stop extensions should be checked for cracks, since they take hits during hard articulation. Keep the rear lift blocks and U-bolts torqued, because the axle can shift on the blocks as the truck works.
- Check compression strut bushings for wear
- Inspect extended brake lines for kinks and rubbing
- Confirm sway bar spacers sit square
- Re-torque U-bolts on the rear lift blocks
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2062BP |
| UPC | 70000637814 |
| Lift height | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Rear lift | Lift blocks and U-bolts |
| Front shocks | Reuse OEM |
| Steering correction | Not needed |
| Fitment | Direct fit |
Vehicle fitment
It is a direct fit for the 2006-2008 Dodge Ram 1500 in the Laramie, SLT, SRT-10, ST, SXT, Sport and TRX4 versions.
Ram 2500 and 3500 trucks and Ram 1500 models from other years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the front spindles and adding compression struts changes front geometry, so have the alignment and driveline angles checked after installation.
What’s included
The kit includes front spindles and knuckles, front and rear crossmembers, compression struts, front sway bar spacers, bump stop extensions, extended-length brake lines, and rear lift blocks with U-bolts.









