Overview
The Pro Comp K6006M is a 6-inch stage 1 suspension lift with PRO-M front and rear shocks for the Nissan Titan, fitting the 2004–2015 and 2017–2021 model years. The lift height range is 6 to 7 inches. The kit includes PRO-M rear shocks and 4-inch tall tapered lift blocks.
The front uses one-piece crossmembers with bump stop pads, and 1-inch front bumper spacers add clearance for 35-inch tall tires on 18-inch to 20-inch rims with up to 5 inches of back spacing. It is not made for XD models of the Titan.
Key features
- High strength extended steering knuckles that Pro Comp says maintain OE geometry
- Heavy duty one-piece front crossmembers with bump stop pads
- PRO-M rear shocks and 4-inch tall tapered lift blocks, included
- 1-inch front bumper spacers for 35-inch tall tires on 18-inch to 20-inch rims
- Tested and certified to FMVSS 126 for compatibility with factory stability control.
Keeping the front end in line
Lift blocks and bumper spacers change how load moves through the front and rear, so the bolts that hold them need regular checks. Retorque suspension and steering fasteners after the first few drives, then again at routine service. Bump stop pads wear over time, and a worn pad can let the axle or frame contact each other on rough ground.
Shocks work harder when the truck sits higher, so inspect the mounts and bushings during tire rotations. Larger tires add weight and change steering feel, which can show up as a vague center or a pull. Keeping the alignment checked after any wheel or tire change helps the kit wear evenly.
- Check bump stop pads for cracks or flattening
- Look for rubbing between tires and bumper spacers
- Recheck driveline clearance after each lift change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K6006M |
| Suspension type | Lift kit, 6-inch stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-M |
| Rear shocks | PRO-M, included |
| Rear lift blocks | 4 inches tall, tapered |
| Front bumper spacers | 1 inch |
| Tire size | 35 inches tall |
| Back spacing | Up to 5 inches on 18-inch to 20-inch rims |
Vehicle fitment
It fits Nissan Titan trucks in the LE, PRO-4X, Platinum Reserve, S, SE, SL, SV and XE versions, for 2004–2015 and 2017–2021 model years.
The list has no 2016 model year, and the kit does not fit XD models. The Nissan Titan XD and other Nissan trucks are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit combines steering knuckles, front crossmembers, lift blocks and bumper spacers, so the alignment and driveline angles should be checked after the install. Pro Comp’s notes on the 35-inch clearance depend on the wheel size and back spacing listed above.
What’s included
High strength extended steering knuckles, one-piece front crossmembers with bump stop pads, PRO-M rear shocks, 4-inch tapered lift blocks, and 1-inch front bumper spacers.






















