Overview
The Pro Comp 51 Series Rock Crawler 15×10 wheel, part number PCW51-5183, is a 15-inch steel wheel that is 10 inches wide. It has a 6 on 5.5 bolt pattern and a black finish in the series’ gloss black, with a windowed style.
The center bore is 108, the offset is -44 and the backspacing is 3.75. The Rock Crawler line comes in several sizes and backspacings and is built from black steel. Fitment is universal, so the hub pattern and deep negative offset need checking before fitting.
Key features
- Steel construction
- 15-inch diameter, 10-inch width
- 6 on 5.5 bolt pattern
- Center bore 108
- Offset -44 with backspacing 3.75
- Windowed style in gloss black
Rock crawler wheel setup
Steel wheels are often chosen for rock crawling because they tend to bend under hard impacts rather than crack. A bent steel rim can sometimes be straightened, which suits trail use, though it still needs inspection. Look at the bead seat, the rim lip and any weld areas after rough trail days, and check that the valve stem remains tight and sealed.
Deep negative offsets move the tire further toward the body, so suspension articulation and steering lock deserve a test. Tire bead retention also matters at low pressures, so pair the wheel with a tire suited to the trail use you plan. Recheck lug nut torque after the first few runs.
- Inspect bead seats and rim lips after trail use
- Check valve stems for leaks
- Test steering lock and suspension travel with the tire mounted
- Pair tire construction with low-pressure trail use
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-5183 |
| Wheel diameter | 15 inches |
| Wheel width | 10 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -44 |
| Backspacing | 3.75 |
| Style | Windowed |
| Finish | Black, gloss black |
| Construction | Steel |
| Series | 51 Series District |
Vehicle fitment
This steel wheel is universal fit and is not matched to a vehicle. Confirm the 6 on 5.5 pattern and 108 center bore against the hub, then measure the -44 offset against the fender and suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A -44 offset moves the wheel far outward, so fender and tire clearance must be measured with the wheel mounted and the suspension at full travel.
The steel build is intended for rough terrain. Match the 108 center bore and 6 on 5.5 pattern to the hub before mounting.
What’s included
Not included: center cap and lug nuts, which are sold separately.









