Overview
The Pro Comp 97 Series Rock Crawler wheel, part number 97-5866, is a 15 by 8 inch steel wheel with a 5 on 4.5 bolt pattern and a gloss black finish. It is a Monster Mod wheel in the holed-style steel wheel line.
The wheel is built from quality materials on modern production equipment, with a gloss black powder coat finish. It has a -19 offset, 4.5 backspacing and an 83 center bore. These measurements decide how the wheel sits relative to the hub and fender, so check them before fitting.
Key features
- Steel construction with a gloss black powder coat finish
- 15 in. diameter and 8 in. width
- 5 on 4.5 bolt pattern
- Holes style, part of the 97 Series
- Offset -19 and backspacing 4.5
- Center bore of 83
Steel wheels on the trail
Steel wheels are heavier than aluminum but tend to bend rather than crack when they hit rocks. That makes them a common choice for rock crawling, where impacts are frequent. The powder coat finish protects the metal from moisture, though chips and scrapes can expose bare steel and start rust. Regular inspection after trail use helps catch damage early.
The fit of a steel wheel depends on the same measurements as any other wheel. Bolt pattern, center bore and offset must match the hub, and backspacing affects how close the tire sits to the suspension. Lug nuts should suit the wheel seat style, since a mismatch can loosen under trail vibration. Valve stems and tire mounting should be checked when the tire is fitted.
- Look for bent rims after rock impacts
- Touch up powder coat chips promptly
- Recheck lug nuts after the first trail run
- Inspect tire beads for proper seating
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | 97-5866 |
| Series | 97 Series (Rock Crawler) |
| Diameter | 15 in. |
| Width | 8 in. |
| Bolt pattern | 5 on 4.5 |
| Offset | -19 |
| Backspacing | 4.5 |
| Center bore | 83 |
| Construction | Steel |
| Style | Holes |
| Finish | Gloss black, powder coat |
| Fitment type | Universal fit (per Pro Comp) |
Vehicle fitment
This wheel is universal fit, so the vehicle must be checked before ordering. The 5 on 4.5 bolt pattern, center bore and -19 offset need matching to your hub and fenders before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lug nuts and the center cap are not included, so choose lug nuts that suit the wheel’s seat and the stud length of your hub.
What’s included
Not included: The center cap and lug nuts are not included. Tires and valve stems need to be sourced separately.











