Overview
The Pro Comp 51 Series Rock Crawler 16×7 wheel, part number PCW51-6783, is a 16-inch steel wheel that is 7 inches wide. It has a 6 on 5.5 bolt pattern and a gloss black finish in a windowed style.
This version has a backspacing of 4. Confirm the center bore and offset for your hub and vehicle before fitting, since both are needed to check clearance. The Rock Crawler line comes in several sizes and backspacings, and this 16×7 model is a universal fit wheel.
Key features
- Steel construction
- 16-inch diameter, 7-inch width
- 6 on 5.5 bolt pattern
- Backspacing 4
- Gloss black windowed style
Trail use and wheel care
A 16-inch steel wheel with a 7-inch width is a common choice for trail builds that need a stronger rim than a stock alloy. Steel tolerates bending better than cast aluminum, although a bent rim should be replaced or professionally repaired rather than hammered back. Look for cracks around the lug holes and the bead seat after rough runs.
Because this wheel is sold without a center cap or lug nuts, plan the hardware before the first install. Use lug nuts that seat properly in the steel lug holes, and check torque after the first few runs. Clean mud from the inner barrel and bead area so the tire seals evenly on the next air-up.
- Inspect lug holes for elongation
- Recheck lug torque after the first drive
- Keep the bead area clean for a reliable air seal
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-6783 |
| Wheel diameter | 16 inches |
| Wheel width | 7 inches |
| Bolt pattern | 6 on 5.5 |
| Backspacing | 4 |
| Style | Rock Crawler Series 51, windowed |
| Finish | Gloss black |
| Construction | Steel |
| Series | 51 Series District |
Vehicle fitment
It is a universal fit wheel and is not built for one vehicle. Check the 6 on 5.5 hub first, then confirm your vehicle’s year, model and trim before ordering. Measure the center bore and offset against the vehicle before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With no offset or center bore listed, test-fit the wheel against the hub and caliper before the first drive.
This 16-inch, 7-inch wide steel wheel has a 6 on 5.5 pattern and a backspacing of 4, which set its inner position. Steel construction suits rough terrain. Confirm the hub bore and clearance before ordering, and measure the center bore and offset against your hub.
What’s included
Not included: center cap and lug nuts, sold separately.









