Overview
The Pro Comp Series 252 Street Lock in 15×10 inches is a windowed steel wheel in flat black, part number PCW252-5165F, drilled for a 5 on 4.5 bolt pattern. Pro Comp Steel Wheels built the 252 line in sizes and backspacing options for off-road builds that want a steel wheel with a powder coated finish.
The -44 offset places the mounting face well behind the centerline, which moves the wheel outward from the hub. Backspacing of 3.75 is the space from the mounting face back to the rim’s rear edge. The 83 center bore sets the centering diameter for the hub.
Key features
- Windowed steel design with a flat black powder finish
- 15 inch diameter and 10 inch width
- 5 on 4.5 bolt pattern
- 83 center bore
- -44 offset and 3.75 backspacing
- Series 252 line with multiple sizes and backspacing options
Windows and weld checks
Windowed steel wheels leave openings that collect mud, grit and water, which can hide cracks near the cutouts. Clean the window edges and look for hairline lines radiating from the corners. Pay attention to the weld seams between the center and the rim, since those joints carry load on every turn.
A wide wheel with a negative offset puts more of the tire outside the fender, so the tire can meet the body on a bump or during a sharp turn. Changing tire width or sidewall height changes the rolling diameter, which also affects speedometer readings and drivetrain load. Recheck clearance any time the tire size or suspension height changes. Keep a written record of clearance readings for future service work and comparisons.
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW252-5165F |
| Series | 252 Series Street Lock |
| Construction | Steel |
| Style | Windowed |
| Finish | Flat black powder coat (the spec sheet says black) |
| Diameter | 15 inches |
| Width | 10 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | -44 |
| Backspacing | 3.75 |
Vehicle fitment
No model years or chassis codes are attached to this windowed steel wheel. The 5 on 4.5 bolt pattern and the 83 center bore are the hub specifications to match, and the -44 offset determines how far the tire sits from the fender. Pro Comp’s universal fit label should be read as “not tied to a vehicle” rather than as a clearance guarantee.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 10 inch rim at -44 offset places the tire well outward, so check clearance at full steering lock and under compression. Inspect the window cutouts and the weld seams for damage before mounting a tire.
What’s included
The 15×10 wheel (PCW252-5165F) comes alone, without a center cap.
Not included: Center cap and lug nuts for part PCW252-5165F, which are sold separately.









