Overview
The Pro Comp PXA5164-218547 is a 20×10 aluminum eight-spoke wheel from the Pro Comp 64 Series Gunner, in satin black milled with a 5 on 5.5 bolt pattern. It is one wheel with a center bore of 108.
The Gunner is a chiseled eight-spoke design with CNC-milled windows and a 3650-pound eight rating. This 10-inch-wide wheel has an offset of -18 and a backspacing of 4.75. The Pro Comp Promise warranty is transferable, and the finish carries two years of coverage.
Key features
- Chiseled eight-spoke design
- CNC-milled windows
- 20-inch diameter, 10-inch width
- 5 on 5.5 bolt pattern
- Center bore of 108
- Offset -18 with 4.75 backspacing
Choosing a hub-matched setup
A five-lug hub at 5.5 and a 108 center bore make the hub match the first decision. Hub-centric fitting uses the center bore to locate the wheel, so the bore should sit snugly on the hub pilot rather than rely on the lugs alone. Lug nut seat style, whether conical or flat, must match the wheel’s seats or the wheel can loosen under load. Adapters and spacers change the offset and should be reviewed against the same clearance checks.
Once the wheel is on, wheel bearings and ball joints carry the extra weight of the tire mass, so a larger diameter tire rolls heavier. Inspect the lug studs for thread damage after mounting, and clean rust from the hub face before each install. After the first trail outing, look at the wheel for rubbing marks on the inner lip and check the tire pressure for even wear.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5164-218547 |
| Series | 64 Series Gunner |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -18 |
| Backspacing | 4.75 |
| Load rating | 3650 lbs (eight rating) |
| Finish warranty | Two years |
Vehicle fitment
No vehicle is named for this wheel. The Gunner comes in 5-, 6- and 8-lug patterns in 17- and 20-inch sizes, and this 20×10 version is cut for 5 on 5.5. Compare the hub with your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount this wheel only to a five-lug hub at 5.5 with a 108 center bore. A test fit with the tire and brake caliper in place confirms clearance at the -18 offset before the first trail run. The 5 on 5.5 pattern is a different hub layout from 5 on 5, so measure the vehicle’s hub before buying. The 108 center bore should seat on the hub pilot, and the -18 offset and 10-inch width require tire and caliper clearance checks. Test-fit with the planned tire size before trail use, and compare the 4.75 backspacing with inner clearance measured on the vehicle.
What’s included
A single 20×10 aluminum wheel makes up the package.











