Overview
The Pro Comp PXA5173-7983 is a 17×9 aluminum spoke wheel from the Pro Comp 73 Series Trilogy line, in satin black milled with a 6 on 5.5 bolt pattern. It is sold as one wheel with a center bore of 108 and an offset of -6.
This 9-inch-wide wheel has a backspacing of 4.75, and the brand describes its alloy design as offering the high offset needed for brake clearance.
Key features
- Low-pressure cast aluminum construction
- Spoke face style
- 17-inch diameter, 9-inch width
- 6 on 5.5 bolt pattern
- Center bore of 108
- Offset -6 with 4.75 backspacing
Hub seating and lug fit
A six-lug hub with a 5.5 spacing is a less common layout, so confirming the bolt pattern before anything else prevents a return. Seating matters as much as the pattern. The 108 center bore should sit snugly on the hub pilot, and a hub-centric ring can close any gap when the bore is larger than the pilot. Test-fit the wheel with the tire mounted, since width and offset decide how the tire clears the fender and brake caliper.
Lug nut seat type matters on a spoke wheel. Use nuts with a seat shape that matches the wheel’s lug holes, and avoid mixing seat types on one hub. Retorque after the first drive and again after a few days of use, paying attention to any wobble or ticking from the brakes.
- Verify all six lug holes line up before tightening
- Keep the rim face clean during mounting
- Recheck balance after tire changes
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5173-7983 |
| Series | 73 Series Trilogy |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
Its design is universal fit and does not identify a particular truck or Jeep. Begin with the 6 on 5.5 hub and 108 center bore, then check the -6 offset against the brake caliper and inner fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only a six-lug hub measuring 5.5 across the bolt holes accepts this wheel. Confirm the 108 center bore seats on the hub pilot, and test-fit the rim with the tire before the vehicle sees trail use. Six lug holes on a 5.5 spacing must line up exactly with the hub, and the 108 center bore should seat on the hub pilot. The 9-inch width and -6 offset decide how the tire sits relative to the fender and brake caliper. Test-fit the rim with the tire mounted, and recheck clearance after any change in tire size or suspension height. The 4.75 backspacing sets the inner lip position behind the mounting face. The 108 center bore and 6 on 5.5 spacing are the two numbers to match first. The 9-inch rim should be paired with a tire of matching width, and the -6 offset deserves a check against the inner fender with the tire mounted.
What’s included
One 17×9 aluminum wheel. Confirm the lug nuts and center cap your six-lug hub needs before mounting.











