Overview
The Pro Comp K5054B is a 4-inch Stage 1 spacer lift kit with ES3000 front and rear shocks for the 1986–1995 Toyota 4Runner and Toyota Pickup. It uses steering knuckle spacers and front and rear crossmembers, and a rear block and U-bolt kit lifts the back of the truck.
Bump stop extensions and upper control arm mount brackets are included, and the front sway bar links are part of the front package. The lift height range is 3 to 4.99 inches.
Key features
- 4-inch lift height from a Stage 1 kit
- Steering knuckle spacers
- Front and rear crossmembers
- Front sway bar links
- Bump stop extensions
- Upper control arm mount brackets
Upper control arms and bump stops
Upper control arm mount brackets change where the arm attaches to the frame, which alters caster, pinion angle and the way the axle moves through its travel. Because older frames can flex or corrode, the brackets and their welds deserve a close look before the kit goes on. Bump stop extensions limit travel at full compression and protect the shocks and springs from bottoming out.
On an older truck, the rubber on bushings and bump stops often has hardened, so inspect them and replace any that are cracked. Confirm the bump stops clear the springs at full travel, and check the lines and steering shaft for clearance. After driving, look for shifted bolts, fresh grease on the joints and any uneven tire wear across the front axle.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5054B |
| UPC | 614901207187 |
| Lift height | 4 inch (lift height range 3 to 4.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Spacer |
| Front lift | Steering knuckle spacers |
| Rear lift | Lift blocks and U-bolts |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
Vehicle fitment
It fits the 1986–1995 Toyota 4Runner in the DLX and SR5 versions, and the 1986–1995 Toyota Pickup in the Base, Base Turbo, DLX, SR5 and SR5 Turbo versions.
The list covers the 1986 through 1995 model years only, so the 1985 and earlier trucks and the 1996 and newer generation are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Upper control arm mount brackets and steering knuckle spacers change the front suspension geometry, so have the alignment checked after installation, and confirm the bump stops clear the springs at full travel.
What’s included
The kit includes steering knuckle spacers, front and rear crossmembers, front sway bar links, bump stop extensions, upper control arm mount brackets, the rear block and U-bolt kit, and ES3000 front and rear shocks.









