Overview
The Pro Comp K1053B is a 4 inch stage 1 lift kit with ES9000 shocks. It fits 1988-1999 Chevrolet and GMC K-series trucks, 1992-1999 Suburbans, the 1992-1993 Chevrolet Blazer, the 1996-1999 Chevrolet Tahoe and the 1992-1996 GMC Yukon. The lift height range is 3 to 4.99 inches.
The front lift uses drop brackets, with front and rear crossmembers, compression struts, front sway bar links, bump stops, torsion bar drop brackets and upper control arm (A-arm) mount brackets. The rear uses lift blocks and U-bolts. The kit includes steering correction in the form of a steering drop and center link, and the shocks are included.
Pro Comp describes its suspension products as customer-driven, racing-influenced technology with a focus on world-class manufacturing.
Key features
- 4 inch stage 1 lift, lift height range 3 to 4.99 inches
- Front lift by drop brackets and torsion bar drop brackets
- Front and rear crossmembers and compression struts
- Front sway bar links and bump stops
- Upper control arm (A-arm) mount brackets
- Steering correction: steering drop and center
- Rear lift by lift blocks and U-bolts
- ES9000 shocks are included, with ES3000 at the front.
Before the lift
A stage 1 lift raises the truck while keeping most of the factory suspension in use, which suits street and light trail driving. The front and rear changes shift the geometry of the whole vehicle, so the steering, brakes and driveline all need checking once the work is finished. Plan the job for a level space with time to measure and re-check each step.
Tires and clearance deserve attention early. A taller stance can rub at full steering lock or on the inner fender, and brake lines and wiring may need more slack. Test the full range of suspension travel before driving normally, and recheck the fasteners after the first miles of use.
- Test full steering lock for tire rub
- Check brake line and wiring slack
- Re-check fasteners after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1053B (also sold as EXPK1053B) |
| UPC | 614901122312 |
| Product type | Lift kit with shocks |
| Lift height | 4 inch, stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Bracket |
| Front lift | Drop brackets |
| Rear lift method | Lift blocks and U-bolts |
| Rear lift component | Block |
| Steering correction | Steering drop/center |
| Shocks | Included: ES9000 shocks, with ES3000 at the front |
| Fitment type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the Pro Comp K1053B covers the 1992-1993 Chevrolet Blazer, the 1988-1999 Chevrolet K1500, the 1992-1999 Chevrolet K1500 Suburban, the 1996-1999 Chevrolet Tahoe, the 1988-1999 GMC K1500, the 1992-1999 GMC K1500 Suburban, the 1988-1998 GMC K2500 and the 1992-1994 and 1996 GMC Yukon, in the trims listed in the manufacturer data.
Only the years and models above are listed. The 2-wheel-drive trucks, other Tahoe, Yukon and Suburban years and later Chevrolet or GMC trucks are not included in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and axle parts are safety-critical, so professional installation is the safer choice. Torque every fastener to the value in the vehicle service information, and check driveshaft angles, brake line and wiring length, and headlight aim after the lift. Check local rules on lift height and bumper height.
- Support the vehicle on rated jack stands on level ground; never work under a vehicle held only by a jack.
- Inspect nearby bushings, mounts and hardware while the area is open, and replace anything worn.
- Re-check fastener torque after the first miles of driving, and again at regular service intervals.
- Have the alignment checked after any suspension or steering work.
- Confirm tire, brake line and wiring clearance through the full range of suspension travel before driving normally.
What’s included
A 4 inch lift kit with drop brackets, front and rear crossmembers, compression struts, front sway bar links, bump stops, torsion bar drop brackets, A-arm mount brackets, steering correction, rear lift blocks and U-bolts, and shocks.
Not included: Any part not named in the kit contents must be sourced separately. Review the package contents against your installation before starting.









