Overview
The Pro Comp PXA7005-7965 is a 17×9 flat black aluminum wheel in the 05 Series Torq line. It uses a split-spoke design with a 5 on 4.5 bolt pattern, a center bore of 83, an offset of -6 and a backspacing of 4.75.
The 5 on 4.5 pattern is a different hub layout from the 5 on 5 and 6 on 5.5 wheels in this line, so the bolt pattern check comes first. The Torq is cast aluminum made for performance trucks and sport utility vehicles.
The 5 on 4.5 pattern is the first measurement to match, and it differs from the 5 on 5 and 6 on 5.5 Torq wheels in this line. The 83 center bore and the -6 offset need to be checked against the hub, and the 4.75 backspacing should be compared with the inner clearance on the truck.
Choose the tire size and load rating for a 17-inch rim that is 9 inches wide. The matte black split-spoke face is the finish and style of this wheel, and the construction is cast aluminum.
Measure the hub before buying, since a bolt pattern mismatch is the most common reason a wheel will not mount.
Confirm the 5 on 4.5 pattern before mounting, because a bolt pattern mismatch will stop the wheel from seating on the hub. The 9-inch width and -6 offset set the face position, so check the fender and caliper clearance on the truck.
Key features
- Flat black finish
- Split-spoke aluminum design
- 5 on 4.5 bolt pattern
- Center bore 83
- Offset -6
Checking a 5 on 4.5 hub
Bolt pattern is measured across the studs of the hub, so the distance between two studs must match the wheel exactly. A 5 on 4.5 pattern is close to, but different from, a 5 on 5 pattern, so the stud spacing should be measured with a caliper rather than judged by eye. Wheels that look similar can differ enough to stop the lug nuts from seating properly.
Once the pattern matches, check the hub centering and the lug seat type. Lug nuts should seat fully on the wheel, and studs should show no thread damage. Re-torque after the first few drives on the new wheel, since seating can settle slightly under the first loads.
- Measure stud spacing before ordering
- Match lug seat type to the wheel
- Inspect studs for thread damage
- Re-torque after the first few drives
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7005-7965 |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | -6 |
| Backspacing | 4.75 |
| Style | Split spoke |
| Finish | Flat black |
| Construction | Aluminum |
| Series | 05 Series Torq |
Vehicle fitment
It is a universal-fit wheel. Match the 5 on 4.5 bolt pattern, the 83 center bore and the -6 offset to your truck before buying.
Tire size and load rating must suit a 17×9 wheel. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One wheel. Verify the package contents on arrival before any mounting work.











