Overview
The ARB RD157 is an air locking differential for the rear Dana 44 on the Jeep Wrangler JK, covering the 2007-2018 model years. It is built for aftermarket axles with 35 splines and for gears at 3.73 and down.
The locker is air activated and uses a push button to engage. When it is locked, both axles turn together, which turns an open differential into a full spool for traction on rough ground. An ARB onboard air compressor is required to activate it and is sold separately from the unit.
Key features
- Rear Dana 44 position for the JK
- Fits aftermarket axles with 35 splines
- For use with 3.73 and down gears
- Air activated selectable locker
- Simple push button operation
Using the push button
A push button locker is simple to run, but timing matters. Engage the locker before the wheels lose grip, such as before a steep climb or a rut, rather than after one wheel has already spun. Once locked, the axle keeps both rear wheels turning together, so turns on pavement should be made with the locker released.
Check the air supply before a trip. Confirm the compressor runs, the air lines are free of kinks, and the switch engages as expected. After trail use, inspect the fittings for mud and damage, and check that the locker still engages and releases. Keep the axle oil at the proper level, since a locker and gear set work hard under load and worn oil shortens their life.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD157 |
| UPC | 88134801224 |
| Axle type | Dana 44, rear |
| Axle spline | 35 splines |
| Gear ratio | 3.73 and down |
| Differential type | Air activated selectable locker |
| Operation | Push button |
Vehicle fitment
The rear Dana 44 on the Jeep JK is covered, with 35 spline aftermarket axles, which fits the 2007-2018 Wrangler JK. The gear ratio and spline count must also match the axle you are running.
It is designed for the rear axle on the Wrangler JK, not the TJ, LJ, JL or front axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Have a gear shop fit the locker and set the gear mesh and pinion preload, because the locker and gears need to be matched to the axle. Plan the air line and compressor mounting before installation.
What’s included
The air locking differential.
Not included: the ARB onboard air compressor.











