Overview
The Power Stop AR83079XPR is a rear drilled and slotted brake rotor for the 2012–2017 Jeep Grand Cherokee (WK) SRT and SRT8 and the 2018 Grand Cherokee SRT and Trailhawk.
The rotor is cast from G3000 grade material and finished with silver zinc plating to resist rust. Cross drilling helps cooling and the slots clear gas and dust, a design often chosen for street and day track driving. It is the rear rotor for 2012–2017 Jeep Grand Cherokee (WK) SRT and SRT8 models and 2018 SRT and Trailhawk models.
Key features
- Power Stop credits the cross-drilled holes with rotor temperatures up to 180°F lower
- Slots keep a clear contact patch between the pad and the rotor
- Tru-Cast technology with precision machining
- Runout specification of 0.0015 and DTV specification of 0.005
- Balanced by milling, as with all Evolution rotors
- Zinc plated finish in silver for corrosion resistance
- G3000 grade casting
- Aimed at reducing fade
- Visual upgrade behind factory or aftermarket wheels
Pad and rotor pairing
Rotors and pads work as a pair, and pad compound affects how a drilled and slotted rotor wears and feels. Aggressive pads can heat the rotor quickly, while street compounds suit normal driving. Pairing rotors with pads rated for the intended use helps the holes and slots do their job.
New rotors should be bedded in with a series of moderate stops so an even transfer layer forms on the friction surface. Check the rotor edge for cracks around the holes and slots, and measure thickness when pads are changed. Rear rotors often wear more slowly than front rotors, but rear brake parts still need periodic inspection.
- Replace rotors in pairs across the rear axle
- Check caliper slide pins when fitting new rotors
- Clean the hub face before mounting
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR83079XPR |
| UPC | 792088981721 |
| Product line | Power Stop Evolution |
| Position | Rear |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Finish | Silver zinc plated |
| Runout | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Coating | Coated |
| Cooling holes | Beveled, precision-drilled cross holes; Power Stop says they keep rotors up to 180°F cooler |
| Slots | Rounded slots that sweep a clear contact patch between pad and rotor |
| Manufacturing | Tru-Cast technology, precision machined |
| Fade | It is designed to reduce brake fade. |
| Appearance | It is designed to look good behind custom or factory wheels. |
| Plating note | All drilled and slotted rotors except hub and rotor assemblies are silver zinc plated |
| Fit | Direct fit |
Vehicle fitment
It is the rear rotor for the 2012–2017 Jeep Grand Cherokee (WK) SRT and SRT8 and the 2018 Jeep Grand Cherokee SRT and Trailhawk.
Listed vehicles:
- 2018 Jeep Grand Cherokee (SRT, Trailhawk)
- 2012–2017 Jeep Grand Cherokee (WK) (SRT, SRT8)
Confirm fit for your vehicle’s year, model and trim before ordering.









