Overview
The Power Stop JBR730XPR is a front drilled and slotted brake rotor sold as a pair. The drilled holes help cooling, and the slots clear gas and dust from the pad face.
The rotor uses G3000 grade castings and carries silver zinc plating to resist rust, except on hub rotor assemblies. Power Stop presents this design as a popular performance choice for street and day track applications.
Key features
- Front-position drilled and slotted design
- Cooling holes plus gas-clearing slots
- G3000 grade castings
- Silver zinc plated, hub rotor assemblies excepted
Front rotor replacement
Front rotors wear with every stop, and the braking feel often changes before the rotor reaches its limit. Look for pulsation in the pedal, scoring on the friction face and a visible lip at the outer edge. Measure thickness against the minimum stamped on the rotor hat or in your service manual before reusing an old one.
Rotors work with the pads, so replacing them together is common practice. Clean the hub face and remove rust from the mounting surface before setting the new rotor, since a poor seat can cause runout that feels like a warped rotor even when the rotor is new.
- Replace pads together with rotors when the friction surface is worn
- Clean the hub mounting face before fitting the rotor
- Check for hub rotor assemblies if your setup uses them
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR730XPR |
| UPC | 792088560100 |
| Position | Front |
| Design | Drilled and slotted |
| Casting grade | G3000 |
| Plating | Silver zinc |
| Quantity | Pair |
Vehicle fitment
No vehicle is named for this front rotor. Confirm fit for your vehicle’s year, model, trim and hub pattern before ordering.
A rear rotor is a different part and is not covered here. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of front brake rotors.
Not included: Plan for brake pads and mounting hardware separately, and check your setup before installing.








