Overview
The JBR1158XPR is a rear slotted and cross-drilled brake rotor for the 2007–2018 Acura RDX and 2005–2016 Honda CR-V. Its cross-drilled holes help keep temperatures down, and the rounded slots clear water, gas and dust from the pad.
It is for owners of the 2007–2018 Acura RDX and 2005–2016 Honda CR-V who want a rear rotor with a slotted and cross-drilled face rather than a plain disc.
A rotor’s face is where the pads grip, so a flat, clean surface with correct run-out matters for smooth braking.
Key features
- Slotted and cross-drilled rear rotor
- Direct fit for the listed vehicles
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
- Mill balanced
- Looks good behind custom or factory wheels
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
Choosing pads for slotted rotors
Pads for slotted rotors are chosen to match the rotor face and the driving the vehicle does. Very hard pad compounds can wear a rotor faster and leave more dust in the slots, while very soft compounds fade sooner under repeated stops. A balanced pad suited to daily driving and occasional highway trips is a sensible choice for crossovers like these.
Rotors and pads should be replaced together on the same axle, since mixing new rotors with worn pads can leave uneven contact. Bed the new set in with a series of moderate stops, and allow the brakes to cool between hard efforts. Note any squeal or pulsing in the first days of driving and inspect the rotor if it appears.
- Use pads designed for slotted rotor faces
- Inspect cross-drilled holes for cracking at each service
- Clean the hub face before mounting the rotor
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR1158XPR |
| UPC | 792088558121 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Rear |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the 2007–2018 Acura RDX (Base, SH-AWD) and the 2005–2016 Honda CR-V (EX, EX-L, LX, SE, Touring).
Compare the old rotor’s diameter, thickness, bolt pattern and weight against your vehicle first.
Only the Acura RDX and Honda CR-V are named; other Acura and Honda models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace pads on the same axle when the rotors are changed, and bed them in with moderate stops.
What’s included
The package is a single rear brake rotor.
Not included: Brake pads and mounting hardware do not come with the rotor.









