Overview
The Power Stop EBR1021XPR is a rear drilled and slotted brake rotor for the 2013–2015 BMW X1. The rotor is precision machined with Tru-Cast technology, with run-out within 0.0015 and DTV tolerance within 0.005.
The EBR1021XPR suits owners of the 2013–2015 BMW X1 who want a rear rotor with a drilled and slotted face instead of a plain disc. Check year, model and trim against this fit before buying.
A rotor’s face is where the pads grip, so a flat, clean surface with correct run-out matters for smooth braking.
Key features
- Drilled and slotted rotor
- Direct fit for the listed vehicles
- G3000 grade cast
- Slots keep a clear contact patch between pad and rotor
- Rotor run-out within 0.0015 and DTV tolerance within 0.005
- Rounded slots that sweep water, gas and dust from the pad contact patch
- Silver zinc plated to shield against rust during normal operation
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
Rear rotor wear and checks
Rear rotors on a crossover like the X1 do less of the stopping than the fronts, but they still carry a real share of the load and wear steadily over time. A drilled and slotted face gives the pad a cleaner contact surface, yet the pad material matters just as much. Soft or mismatched pads can wear a slotted face unevenly, so choose pads suited to the rotor’s intended use.
When replacing rotors, plan on pads at the same time and bed them in with a few moderate stops before any hard braking. Rear rotors are often swapped in pairs so both sides brake alike. Keep grease and brake fluid off the friction surface, and clean the hub face before mounting so the rotor seats flat.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | EBR1021XPR |
| UPC | 792088924414 |
| Product type | Drilled and slotted disc brake rotor |
| Position | Rear |
| Fit type | Direct fit |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the 2013–2015 BMW X1 xDrive35i.
Diameter, thickness, bolt pattern and weight should be matched against the rotor you are replacing before installing.
Only the 2013–2015 BMW X1 is listed; the list does not cover earlier or later BMW X1 years or other BMW models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake work affects stopping ability, so have the installation checked by a qualified technician if you are not experienced with disc brakes.
What’s included
This is one rotor, with no extra parts included.
Not included: Pads and hardware are separate parts and must be bought separately.









