Overview
The Power Stop Evolution AR8552XPR is a pair of drilled and slotted solid rear brake rotors for the 1995-2001 Ford Explorer, 1995-2002 Explorer Sport, 1998-2002 Ford Ranger and 1997-2001 Mercury Mountaineer. The rotors are cast iron with five lugs.
The drilled holes help keep brake temperatures down, and the rounded slots wipe away gas and debris to leave a clear contact patch on the rotor face.
The rounded slots help clear gas and debris and keep a clear contact patch, while the drilled holes support rotor cooling. The rotors are machined, mill balanced and plated to resist rust. Because they are solid rather than vented, these are rear rotors and do not replace the vented front rotors on the same vehicles. Ranger and Mountaineer owners should check the model year against the range for their vehicle.
The five-lug pattern and coating apply to this set. Each model has a slightly different year range, so read the years in the fitment section rather than assuming they match across Ranger, Explorer and Mountaineer.
Key features
- Slotted and cross-drilled rear rotors
- Solid cast iron, 5 lugs
- 2 wheel set, coated
- Silver zinc dichromate plating
- Machined, mill balanced and guaranteed to fit.
- Maximum run-out 0.0032 in (0.08 mm)
Choosing rear rotors
Solid rear rotors give a firm, even contact surface and suit many rear axles where the brake load is lighter than at the front. Their faces need to stay flat, so inspect them for thickness variation, scoring and heat cracks each time the pads are replaced. Mounting surfaces should be clean and free of rust, since even small debris can push the rotor out of true and cause pulsation.
Slots and holes both help the pad face stay clean, but they also create edges that wear pads over time. Choosing pads made for slotted rotors helps keep wear even. Replacing the rotors and pads together gives the most predictable result, and a new set should be bedded in gently before normal driving.
- Match rotor style to the position: solid for the rear here
- Check rotor thickness against the minimum stamped on the hat
- Clean hub faces and remove rust before mounting
- Torque lug nuts in a star pattern
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTAR8552XPR |
| Part type | Evolution drilled and slotted brake rotors |
| Disc material | Cast iron |
| Style | Solid |
| Position | Rear |
| Number of lugs | 5 |
| Quantity | 2 wheel set |
| Coating | Coated |
| Maximum run-out | 0.0032 in (0.08 mm) |
| Maximum DTV tolerance | 0.0005 in (0.0125 mm) |
Vehicle fitment
It fits the 1995-2001 Ford Explorer, 1995-2002 Ford Explorer Sport, 1998-2002 Ford Ranger and 1997-2001 Mercury Mountaineer.
The 2002 and later Explorer is not in the list apart from the Explorer Sport, and the front rotors for these trucks are separate parts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These rotors are solid discs, cast in iron with five lugs, and are installed at the rear of the listed vehicles. Use new pads and clean hub faces, and have a technician check pedal feel and the parking brake before the vehicle is driven.
What’s included
Two solid rear rotors.








