Overview
The Power Stop AR85108XPR is a slotted and cross-drilled brake rotor for the 2010–2018 Ford F-150, the 2007–2017 Ford Expedition and the 2007–2018 Lincoln Navigator.
The rotor combines slots that degas the brake pads with cross-drilled holes that aid cooling. The drilled holes keep rotors up to 180°F cooler.
Key features
- Cross-drilled holes, which Power Stop says keep rotors up to 180°F cooler
- Rounded slots sweep water, gas and dust from the contact patch between pad and rotor
- Precision machined with Tru-Cast technology
- Runout within 0.0015 and DTV tolerance within 0.005
- Mill balanced Evolution rotor
- Silver zinc plating helps resist rust in normal operation
- G3000 grade cast construction
- Reduces fade under hard braking
- It looks right behind either custom or factory wheels.
Rotor care and wear signs
Rotors on pickups and large SUVs take a lot of heat, so their condition affects braking more than many owners expect. Common signs of wear include pedal pulsation, a grinding noise, a metallic scrape from the wheel and visible ridges at the outer edge of the friction surface. A rotor with any of these signs should be measured and replaced if it is below the minimum.
Slotted and cross-drilled rotors give pads a clean path to wipe debris and vent heat, but cracks can start at holes or slots after heavy use. Inspect the holes and slot edges with a light at each service. Keep the hub and wheel bolting surfaces clean, and torque lug nuts evenly. Brake pads should be bedded in gently after installation.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR85108XPR |
| UPC | 792088917393 |
| Product line | Power Stop Evolution |
| Position | Front |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Finish | Silver zinc plated |
| Runout | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Coating | Coated |
| Cooling holes | Beveled, precision-drilled cross holes; Power Stop says they keep rotors up to 180°F cooler |
| Slots | Rounded slots that sweep a clear contact patch between pad and rotor |
| Manufacturing | Tru-Cast technology, precision machined |
| Fade | The rotor helps cut fade under repeated hard stops. |
| Appearance | Its appearance suits both custom and factory wheels. |
| Plating note | All drilled and slotted rotors except hub and rotor assemblies are silver zinc plated |
| Fit | Direct fit |
Vehicle fitment
It fits the front axle of the 2010–2018 Ford F-150, the 2007–2014 and 2017 Ford Expedition and Expedition EL, and the 2007–2018 Lincoln Navigator and Navigator L.
Listed vehicles:
- 2007–2014, 2017 Ford Expedition (Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT)
- 2007–2014, 2017 Ford Expedition EL (Eddie Bauer, King Ranch, Limited, Platinum, SSV, XL, XLT)
- 2010–2018 Ford F-150 (FX2, FX4, King Ranch, Lariat, Lariat Limited, Limited, Platinum, SSV, STX, XL, XLT)
- 2007–2018 Lincoln Navigator (Base, Black Label, Luxury, Premiere, Reserve, Select, Ultimate)
- 2007–2018 Lincoln Navigator L (Black Label, Luxury, Reserve, Select, Ultimate)
The 2015–2016 Expedition and F-150 years before 2010 are not on this list. Confirm your vehicle’s year, model and trim before ordering.









