Overview
The Borgeson Steering power steering box, part number 800123, is a power steering box offered as a power upgrade. It is all new and uses a 6 bolt design.
Steering box swap planning
A power steering box converts steering wheel rotation into movement at the pitman arm, so its mounting and input connection must line up with the column and linkage. Before buying a box, check the bolt pattern, input shaft style and linkage geometry on your truck. Small mismatches can make the box impossible to fit or cause binding once it is installed.
A box swap is a good time to inspect the rest of the steering system. Look at tie rod ends, drag link, pitman arm and steering column joints for play or wear. Replace worn parts while the system is open, since they affect alignment and steering feel once the new box is in use.
- Check bolt pattern and input shaft before ordering
- Inspect tie rod ends and drag link
- Look for play in the column joints
- Set alignment after the swap
Specifications
| Brand | Borgeson Steering |
|---|---|
| Part number | 800123 |
| UPC | 843975017150 |
| Type | Power steering box |
| Bolt pattern | 6 bolt |
Vehicle fitment
Match the mounting pattern, input shaft and linkage on your truck before ordering, since power steering boxes differ by vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A steering box swap involves the steering column, linkage and power steering hoses, so a shop familiar with steering gear replacement is the practical route.
What’s included
The package is the power steering box. Hoses, brackets and hardware are not part of it, so check the package contents before starting the swap.









