Overview
The Moog DS917 is a steering drag link for 4WD 1978–1979 Ford F-150 pickups and the 1978–1979 Ford Bronco. It is a direct-fit part from the Problem Solver line.
The powdered metal gusher bearing lets grease flow through the bearing to the stud. A patented cover plate allows tighter tolerances, and an exclusive cover plate blocks contaminants from the bearing surface. The full-ball metal stud rotates 360 degrees, the Sunoloy-coated metal bearings are patent pending, and the greaseable socket can be flushed with new lubricant to limit corrosion and wear.
Key features
- For 4WD models
- Powdered metal gusher bearing
- Patented cover plate with tighter tolerances
- Exclusive cover plate against contamination
- Full-ball metal stud, 360 degrees of rotation
- Greaseable socket for flushing contaminants
- Sunoloy-coated metal bearings, patent pending
Drag link care
A drag link carries steering force from the steering box to the wheel on the opposite side, so its joints take steady load and occasional shock from road bumps. Dirt and water entering a joint speed up wear, which is why a greaseable socket is useful for regular service. Grease the joint at routine chassis service, and inspect the boot for tears. Clean and dry the fittings before greasing so dirt does not get pushed in.
When a drag link is worn, the steering often feels loose near center, and the truck may pull or wander. Check ends for play, and look for loose hardware at both connections. Drag links are commonly replaced alongside tie rod ends and the pitman arm, and alignment should be checked after any steering linkage work.
Specifications
| Brand | Moog |
|---|---|
| Part number | DS917 |
| Product | Steering drag link |
| Drivetrain | 4WD models |
| Bearing | Powdered metal gusher design |
| Stud | Full-ball metal, 360 degrees of rotation |
| Socket | Greaseable |
| Bearing coating | Sunoloy-coated metal (patent pending) |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1978–1979 Ford Bronco (Custom, Northland and Ranger XLT) and the 1978–1979 Ford F-150 (Base, Custom, Northland, Ranger, Ranger Lariat and Ranger XLT).
Only 4WD models of these two model years are covered, so later years and 2WD trucks do not fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The greaseable socket is meant to be lubricated so fresh grease can push contaminants out, which Moog says helps reduce corrosion and wear.









