Overview
The Fabtech FTS309 is a 4-inch drop pitman arm for 1999 Ford F-250 and F-350 Super Duty trucks built before the March production change. It has a 32-spline mounting hole and is made for power steering.
Fabtech says dropped pitman arms are needed in many of its lift kits to correct steering geometry once a suspension system has been installed, and that it makes them stronger than stock using forging and CNC machining.
Key features
- 4-inch drop to correct steering geometry after a lift
- 32-spline count
- Made for power steering
- Direct-fit design
- Forged and CNC machined, which Fabtech says makes it stronger than a stock arm
Steering geometry after a drop
A dropped pitman arm moves the steering link lower so the steering geometry stays close to the stock arrangement after the suspension has been raised. Without it, the drag link can run at an angle that causes binding, bump steer or uneven steering effort.
When choosing a dropped arm, match the spline count and the steering box type to the truck, and make sure the steering gear is in good condition first. A dropped arm is usually paired with a drag link, tie rods and a track bar check, so inspect those parts at the same time. Recheck the alignment and steering feel after the first drive.
- Match spline count to the steering box
- Inspect the drag link and tie rods
- Recheck alignment after installation
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS309 |
| Amount of drop | 4 inches |
| Spline count | 32 |
| Steering type | Power steering |
| Fitment type | Direct fit |
| Build note | Pre-March production date |
Vehicle fitment
It fits the 1999 Ford F-250 Super Duty and 1999 F-350 Super Duty trucks built before the March production date.
Only the 1999 model year built before March is listed, so later 1999 trucks and 2000 and newer Super Duty models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A pitman arm joins the steering box output to the linkage, so a dropped arm is normally installed with the rest of a suspension kit and followed by a steering and alignment check.










