Overview
The Moog DS300040 is a steering drag link for 4WD 2011–2016 Ford F-250 and F-350 Super Duty trucks. It connects at the pitman arm and is part of Moog’s Problem Solver range.
Moog gives this drag link a gusher-style powdered metal bearing that passes grease through to the stud, a patented cover plate with tighter tolerances than traditional designs, and an exclusive cover plate that keeps contaminants out of the bearing surface. A full-ball metal stud allows 360 degrees of smooth rotational movement for more responsive steering, and patent-pending Sunoloy-coated metal bearings provide a smooth stud swing.
Key features
- Connects at the pitman arm
- For 4WD models
- Powdered metal gusher bearing with grease flow through to the stud
- Patented cover plate for tighter tolerances
- Exclusive cover plate keeps contaminants from the bearing surface
- Full-ball metal stud with 360 degrees of rotation
- Sunoloy-coated metal bearings, patent pending
Drag link service and wear
The drag link carries steering motion from the pitman arm to the steering knuckle or tie rod assembly, so it takes a constant load every time the steering moves. Joint wear is commonly felt as a loose steering wheel, wander at speed, or a knock when the wheels hit a bump. Because the link sits between two moving parts, a worn joint can also make a new pitman arm or tie rod end wear faster than expected.
Before installing a new drag link, clean the mounting surfaces and check the pitman arm connection for correct tightening. Off-road use in mud, sand and water crossings exposes the joints to grit, so inspect the cover plate after each trip. Greasing the joints where the design allows it helps keep the bearings moving smoothly.
- Check the pitman arm connection
- Inspect the cover plate after off-road trips
- Look for play at both ends of the link
Specifications
| Brand | Moog |
|---|---|
| Part number | DS300040 |
| Product | Steering drag link |
| Location | At pitman arm |
| Drivetrain | 4WD models |
| Bearing | Powdered metal gusher design |
| Stud | Full-ball metal, 360 degrees of rotation |
| Bearing coating | Sunoloy-coated metal (patent pending) |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2011–2016 Ford F-250 Super Duty and 2011–2016 Ford F-350 Super Duty in King Ranch, Lariat, Platinum, XL and XLT versions, for 4WD trucks.
The drag link is for 4WD trucks only, so 2WD trucks and other model years are not covered. Confirm your vehicle’s year, model and trim before ordering.










