Overview
The Skyjacker DA65 is a steering arm for the 1961-1977 Dodge W100, the 1977 Dodge W150, the 1961-1977 Dodge W200 and the 1967 Dodge W300. The part number is SKYDA65, and it is a direct fit with a Limited Lifetime Warranty.
Steering components are safety-critical, so confirm fit for your vehicle’s year, model and trim before ordering.
Fitment covers the following Dodge W-series trucks.
Key features
- Steering arm for the listed Dodge W-series trucks
- Direct-fit application
- Limited Lifetime Warranty
- Listed in the Brakes and Steering category
Steering arm service and checks
A steering arm links the steering linkage to the knuckle, so it carries load every time the wheel turns. Wear in the arm or its joints shows up as loose steering, wandering or uneven tire wear, and a worn part should not be left in service.
On an older W-series truck, the arm, tie rod ends and mounting bushings often wear together. Inspect the arm for cracks, bent sections and looseness at each joint, and replace any joint that moves by hand. Clean the mounting surfaces before reinstalling so the bolts seat correctly.
After any steering arm work, have the front alignment checked, re-check fastener torque after the first miles of driving, and look over the steering system at regular service intervals.
- Check for bent or cracked sections
- Inspect joints for play
- Clean mounting surfaces before reinstalling
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYDA65 |
| Product type | Steering arm |
| Warranty | Limited Lifetime Warranty |
| Fitment type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the Skyjacker DA65 covers the 1961-1977 Dodge W100 (Custom, Pickup Base, Series Base), the 1977 Dodge W150 (Base), the 1961-1977 Dodge W200 (Base, Pickup Base, Series Base) and the 1967 Dodge W300 (Series Base).
Only the years and models above are listed. Other Dodge W-series years, the W300 in years other than 1967 and other Dodge trucks are not included in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and axle components are safety-critical, so professional installation is recommended. Torque every fastener to the correct steering specification, and use cotter pins or locking hardware where required. Have the front end alignment checked afterward.
- Support the vehicle on rated jack stands on level ground; never work under a vehicle held only by a jack.
- Inspect nearby bushings, mounts and hardware while the area is open, and replace anything worn.
- Re-check fastener torque after the first miles of driving, and again at regular service intervals.
- Have the alignment checked after any suspension or steering work.
- Confirm tire, brake line and wiring clearance through the full range of suspension travel before driving normally.
What’s included
One steering arm.
Not included: Check the package contents against your installation before starting.









