Overview
The Poison Spyder BFH II rear bumper 17-17-040-D is a bare-steel rear bumper for the 2007–2016 Jeep Wrangler JK, 2-door and 4-door, built for hard-core rock crawling. The name stands for “Built For the Hammers”, and Poison Spyder designed it for maximum ground clearance and departure angle.
The bumper is CNC laser-cut from 3/16 inch plate steel, brake-formed, and no wider than the JK’s rear body tub, with angled facets for sliding over rocks. This version includes recovery shackle tabs CNC machined from 1 inch thick plate steel for 3/4 inch shackles. It has no provisions for a spare tire carrier.
Key features
- Faceted 3/16 inch plate steel rear bumper in bare steel
- No wider than the JK rear body tub
- High clearance recovery shackle tabs, CNC machined from 1 inch thick plate steel
- Tabs take 3/4 inch recovery shackles
- Slot for a hitch receiver (requires part number 17-17-030)
- Laser-cut steel template provided to guide frame cuts
- No provisions for a spare tire carrier
Planning the rear cut
A rear bumper that requires frame cutting is a bigger job than a bolt-on, so plan the work before picking up tools. Mark the cut lines with the template, double-check measurements on both sides, and confirm the frame rails are square. Removing the stock bumper and mounts first gives a clearer view of the rails and crossmember.
Where the crossmember is cut, the installer chooses how to close the opening. Plating across it or replacing the crossmember are the two approaches, and each needs its own materials and skills. Paint or powder coat the bumper after alignment is final, so the finish is not scratched during install.
- Dry-fit the bumper before cutting anything permanent
- Mark template lines on both rails
- Coat the bumper after final alignment
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-17-040-D |
| UPC | 614901751048 |
| Product type | Rear bumper, BFH II |
| Material | 3/16 inch plate steel; shackle tabs from 1 inch thick plate |
| Finish | Bare steel |
| Shackle size | 3/4 inch recovery shackles (not included) |
| Receiver hitch | No; slot for receiver, requires 17-17-030 |
| Tire carrier | No |
| D-ring mount | Included |
| Fit type | Direct fit |
| Body styles | 2-door and 4-door |
Vehicle fitment
It fits the 2007–2016 Jeep Wrangler (JK), 2-door and 4-door.
It is designed for the non-receiver BFH II rear crossmember, not the one with the integrated hitch receiver, part 17-17-030. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting the stock frame rails and rear crossmember, so read the installation instructions first. A laser-cut steel template is provided to guide the cuts. The open crossmember cut can be plated across, which is up to the installer and uses materials not included, or the crossmember can be removed and replaced with the JK BFH II Rear Crossmember. The bumper arrives as bare steel and needs paint or powder coat before final installation.
What’s included
One BFH II rear bumper with CNC machined recovery shackle tabs and a laser-cut steel template.
Not included: Recovery shackles, plating material for the crossmember, and paint or powder coat.









