Overview
The Poison Spyder Brawler Rockers in black powder coat, part number 18-08-200P1, are two-piece mini-boatside rocker armor for the Jeep JK in 4-door models. Each piece is cut from 3/16 inch plate steel and brake-formed, with a black powder coat finish. The armor adds a protruding rub rail, a boatside profile and an entry step to the rocker area. The upper piece follows the sheet metal of the JK, and the ends of the armor are capped in the same 3/16 inch plate steel. The lower piece also attaches at the body mounts.
The upper piece follows the lower section of the JK’s exterior sheet metal, and the lower piece carries a rub rail that sits outboard of the body tub. The boatside below it lets the Jeep slide off rocks and back onto the trail. The Brawler Rockers are not compatible with body lifts.
Key features
- Two-piece mini-boatside design
- Black powder coat finish
- 3/16 inch plate steel, CNC laser-cut and brake-formed
- Rub rail that protrudes about 3-1/4 inches beyond the body tub
- Oval lightening holes along the boatside section
- Angled facets that allow up to a 40 inch tire
Checking clearance before install
Armor like this sits outboard of the body, so clearance is the first thing to check. Tires, steering and track width all change how close the rub rail comes to the wheels, and a larger tire or a suspension change can move the armor into the tire path. Measure the gap at full turn lock and at full suspension travel before drilling anything.
Two-piece boatside armor also depends on the body mounts and the upper attachment points staying sound. Look for cracks at the nut-serts and clip-nuts after rough trail use, and tighten fasteners on a regular schedule. Any change to the suspension calls for a fresh clearance check, since the relationship between body and armor shifts.
- Check the gap at full lock and full compression
- Inspect nut-serts and clip-nuts after trail use
- Re-check clearance after any suspension change
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 18-08-200P1 |
| UPC | 614901751642 |
| Type | Formed plate guard |
| Finish | Black powder coat |
| Plate thickness | 3/16 inch steel |
| Pieces | Two |
| Maximum tire | 40 inch |
| Body lift compatibility | Not compatible |
| Installation | Cutting or drilling required |
Vehicle fitment
The Brawler Rockers are written for the Jeep JK in 4-door models, which is the Wrangler (JK) from 2007 to 2018. Confirm your Jeep is a 4-door JK with no body lift before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The upper piece attaches to the body tube with stainless flat-head cap screws and nut-serts. The lower piece attaches to the upper piece with flat-head screws and clip-nuts, and underneath it attaches at the body mounts. Cutting or drilling is required, and all fastener holes are countersunk.
What’s included
Two black powder coated Brawler Rocker pieces with the stainless fasteners, nut-serts and clip-nuts the kit uses.
















