Overview
The Poison Spyder JK Rocker Knockers with Sliders, bare steel, part number 17-08-020, are body-mounted rocker guards with a tubular DOM slider. They fit the 2007 to 2016 Jeep Wrangler JK. The guards protect the JK’s rocker panel area while letting the Jeep slide over rocks and obstacles.
The rocker panels of a JK are among the most vulnerable parts of the body, and these guards cover that area in 3/16 inch plate steel. The slider sits at an angle to the main tube, which gives boatside-style protection and keeps the doors and body a safe distance from higher trail hazards.
Key features
- Attaches to the body tub at 14 strategic bolt locations
- Mounting plate of CNC laser-cut 3/16 inch plate steel
- Tubular rocker rail of 1.75 inch by .120 wall DOM
- Slider rail of CNC-bent 1.5 inch by .120 wall DOM
- Removable outer skid with oval dimples
- Drain reliefs in the mounting plate
Removable skids and maintenance
A guard like this lives under the Jeep and takes regular contact with trail debris. The removable outer skid is the part most likely to be scraped, dented or worn through, so it is worth inspecting first. Remove the skid when it needs refinishing or replacement, and check the slider underneath for the same kind of wear. Keeping the skid in good shape helps the guard shed debris rather than trap it.
Fasteners deserve regular attention. Body-mounted guards depend on many bolt locations spread across the tub, and any that loosen can start to rattle or wear the holes. After rough trail days, walk around the Jeep and check each visible fastener. Touch up bare steel with a rust-inhibiting primer where the finish has been removed.
- Inspect the outer skid after rough trails
- Check the slider for matching wear
- Retighten fasteners after rough use
- Touch up bare steel to slow rust
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-08-020 |
| UPC | 614901726756 |
| Type | Formed plate guard with standoff and slider |
| Finish | Bare steel |
| Mounting | Body tub, 14 bolt locations |
| Mounting plate | 3/16 inch plate steel |
| Rocker rail | 1.75 inch by .120 wall DOM |
| Slider rail | 1.5 inch by .120 wall DOM |
| Outer skid | Removable, countersunk stainless flat-head screws |
| Installation | Cutting or drilling required |
Vehicle fitment
These guards fit the 2007 to 2016 Jeep Wrangler JK. Compare the year and body style of your Jeep with that range before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation involves cutting or drilling the body. The guard mounts to the body at 14 bolt locations, so the mounting is spread across the body tub. The guards are compatible with all known suspensions and body lifts, including long arm kits, and the mounting plate is designed with drain reliefs to limit debris in the lower body cavity. The skid is removable for replacement or refinishing.
What’s included
Rocker knockers with sliders, outer skid and mounting hardware.














