Overview
The Bestop Highrock 4×4 End Caps Kit in black, part number 44946-01, is a set of two steel end caps that widen the Bestop Modular Front Bumper, part number 44945-01, on the 2007–2018 Jeep Wrangler (JK). The end caps attach to pre-drilled holes on that bumper.
Bestop built the end caps as an optional part of the modular system. They extend the center section for a wider profile and can be taken off again when a trail calls for more tire clearance.
Key features
- Set of two end caps for Bestop Modular Front Bumper 44945-01
- 1/8 inch thick steel with a polymer top cap
- Extends the center section for a wider bumper profile
- Removable when you want more tire clearance on tough trails or rocks
- Electrostatically applied E-coat base layer under a matte-black powder-coat top finish, for resistance to corrosion, nicks, scrapes and scratches
- Mounting hardware and instructions included
Clearance on the trail
Wider end caps change how a bumper sits relative to the tires, so they matter most when turning on tight trails or when rocks sit close to the corners. Removing the caps returns the bumper to its center section width and gives more clearance for the tires. Keep the removed caps and hardware in a dry place so they are ready to refit when the trail calls for a wider profile.
Check the pre-drilled holes for dirt or corrosion before refitting the caps, and tighten the supplied hardware evenly. Polymer top caps can crack under heavy impact, so inspect them after rocky runs. A quick look at the finish after each trip helps catch chips before they rust.
- Check pre-drilled holes before refitting
- Inspect polymer top caps after rocky runs
- Keep removed hardware together
Specifications
| Brand | Bestop |
|---|---|
| Part number | 44946-01 |
| UPC | 77848131777 |
| Product type | Bumper end caps, set of 2 |
| Position | Front |
| Material | Steel with polymer top cap |
| Steel thickness | 1/8 inch |
| Finish | Black powder coat over an E-coat base layer |
| Fits bumper | Bestop Modular Front Bumper 44945-01 |
| D-ring mount | Not included |
| Light mounts | Not included |
| Winch mount | Not included |
| Fitment type | Direct fit |
Vehicle fitment
The Highrock 4×4 End Caps Kit is made for the 2007–2018 Jeep Wrangler (JK). The end caps only work with Bestop Modular Front Bumper 44945-01.
The end caps do not fit other bumpers. Verify the year, model and trim of your vehicle before purchase.
Installation notes
The end caps attach to the pre-drilled holes on Bestop Modular Front Bumper 44945-01, using the supplied mounting hardware and instructions.
What’s included
Two end caps, mounting hardware and instructions.
Not included: The Modular Front Bumper 44945-01 itself, which is a separate part.









