Overview
The Fab Fours DR10-S2960-1 is a front ranch bumper with tow hooks and a blacked-out tread plate finish for 2010 to 2018 Ram 2500 and 3500 trucks, coated in gloss black powder coat.
Fab Fours built the ranch bumper line around the body lines of each truck, without vertical flanges and with tapered edges. This tread plate version combines pipe with tread plate steel and keeps mounts for the factory fog lights. A 2-inch receiver, 1-inch D-ring mounts and a winch mount are available as optional bolt-on parts.
Key features
- Combination pipe and tread plate construction
- Gloss black powder coat or bare steel (-B in place of -1)
- Bolt-on tow hooks included
- Light mounts for the factory fog lights
- Optional bolt-on winch mount for winches up to 16,500 lb
- Optional bolt-on 1-inch D-ring mounts
- Optional bolt-on 2-inch receiver
- Tapered edges with no vertical flanges
Choosing mounts and accessories
A front bumper with tow hooks suits drivers who recover vehicles or tow trailers, but the accessories you add decide how the bumper gets used. A winch mount, D-ring mounts and a receiver each carry loads into different parts of the bumper and frame, so match each accessory to the winch or trailer you actually plan to use. Check the rated capacity of every bolt-on part before you mount it.
Bumpers with fog light mounts are often fitted alongside a winch or a light bar. Plan the wiring first, route cables away from moving parts and use a fused relay for any auxiliary light. Re-check bolt torque after the first few trail runs, since the bumper flexes under load and on rough ground.
- Confirm the winch rating before buying a winch mount
- Route wiring through the fused relay and keep it away from the steering linkage
- Recheck mounting bolts after the first few off-road outings
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR10-S2960-1 |
| UPC | 5810107604 |
| Type | Front ranch bumper, tread plate |
| Position | Front |
| Width | Full |
| Material | Steel |
| Construction | Pipe and tread plate |
| Finish | Gloss black powder coat |
| Fit type | Direct fit |
| Light mounts | Included (factory fog lights) |
| Winch mount | Optional, not included (up to 16,500 lb winches) |
| D-ring mounts | Optional, 1-inch |
| Receiver | Optional, 2-inch |
Vehicle fitment
The DR10-S2960-1 fits the 2010 Dodge Ram 2500 and 3500 and the 2011 to 2018 Ram 2500 and 3500.
Ram 1500 pickups are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tow hooks bolt on as supplied. Anything beyond that, such as a winch, D-rings or a receiver, is an additional bolt-on option.
What’s included
- Front ranch bumper in black tread plate finish
- Bolt-on tow hooks
- Factory fog light mounts
Not included: The optional winch mount, 1-inch D-ring mounts, 2-inch receiver and a winch.




















