Overview
The Painless Wiring Trail Rocker accessory control system without switches, part number 57005, is a relay center for controlling up to eight accessories on a JK Jeep Wrangler. It fits the 2007 to 2015 Jeep Wrangler (JK), including Rubicon, Sahara and Unlimited models.
This kit uses the same relay center as the other Trail Rocker systems, without a switch panel, so you wire your own switches. The weatherproof housing around the relay center holds eight 30-amp fuses and eight 30-amp relays. Weatherproof connectors and wiring run accessories from lights to air lockers.
Key features
- Controls up to eight accessories
- Eight 30-amp fuses and eight 30-amp relays
- Weatherproof housing around the relay center and connections
- Custom bolt-on, powder-coated bracket for the power center
- Weatherproof connectors and wiring for accessories
- Switches are not included, so you can wire your own
- Made in the U.S.A.
Wiring your own switches
Without a switch panel, the switches are the part you choose, so pick types that match how you will use each accessory. Momentary switches suit winches and other tasks that should run only while pressed, while latching switches suit lights and fans that stay on until turned off. Mount switches where they can be reached without taking your attention off the trail, and keep the wiring away from heat and moving suspension parts.
Before you connect a switch, confirm which relay output it will drive and which accessory sits on that output. Use the included connectors rather than splicing wire, and seal every connection that sits outside the housing. Test each circuit with the accessory disconnected first, then reconnect it and check operation under load.
- Choose weatherproof switches for exposed locations
- Label each switch with its accessory
- Confirm the relay output before wiring
Specifications
| Brand | Painless Wiring |
|---|---|
| Part number | 57005 |
| UPC | 749823570054 |
| Accessory outputs | Up to 8 |
| Fuses | 8 at 30 amp |
| Relays | 8 at 30 amp |
| Switches | Not included |
| Mounting bracket | Bolt-on, powder-coated |
| Origin | Made in the U.S.A. |
Vehicle fitment
It fits the 2007 to 2015 Jeep Wrangler (JK), including the 70th Anniversary, Rubicon, Sahara, Sport, and Unlimited versions of those trims, plus the Unlimited X and X trims.
For 2016 to 2018 JK models, or the JL, TJ, YJ or LJ Wrangler generations, confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit has no switch panel, the switch wiring is your job. Route the switch circuits to the relay center’s connectors. Keep all accessory circuits fused at the relay center.
What’s included
The kit includes the weatherproof relay center with eight 30-amp fuses and relays, the bolt-on bracket, and the connectors and wiring for the accessories.
Not included: the switch panel and switches, and the accessories you connect to the outputs.
























