Overview
The Ox Locker Dana 30 27 Spline 3.73 Up Air Selectable Locker, part number OXLD30-373-27-AIR, is an air-operated locker for Dana 30 axles with 27 splines. It is made for front or rear axles with 3.73 and up gears.
Open mode is for smooth street driving, and full spool is for traction when it is needed. A switch changes between the two modes. The forged cover carries an integral air cylinder, and all components are machined in the U.S.A. An external air source, which is not included, is required to run the locker.
Key features
- Open mode for smooth street driving
- Full spool mode for maximum available traction
- Switch-operated change between open and locked
- Forged cover with an integral air cylinder for smooth, reliable operation and serviceability
- Fully machined in the U.S.A.
Choosing gears and axle variant
Selectable lockers work with the gear set, so the ratio of the ring and pinion matters. Lockers are generally used with the gear ratio they were designed for, and a mismatch can make the axle run hotter or wear unevenly under load. Before buying, confirm the axle variant, which can be found on the housing marks or axle tag, and the number of splines on the axle shafts.
Dana 30 variants can differ in housing details, so match the variant to your axle rather than relying on the model name alone. Many builders replace the axle shafts, bearings and gear oil when a locker is fitted, and the ring and pinion should be checked for wear before the new unit goes in. Keep the axle clean during installation so debris does not enter the gears.
- Check the axle tag or housing marks for the variant
- Count the splines on the axle shafts
- Inspect the ring, pinion and bearings during installation
Specifications
| Brand | Ox Locker |
|---|---|
| Part number | OXLD30-373-27-AIR |
| Popular axle manufacturer | Dana |
| Axle location | Rear or front |
| Axle type | Dana 30 Standard, Dana 30 JK, Dana 30 Reverse or Dana 30 TJ |
| Axle spline | 27 splines |
| Gear ratio | 3.73 and up |
| Differential type | Selectable locker, air actuated |
| Air supply | External air source, not included |
Vehicle fitment
The axle types are Dana 30 Standard, Dana 30 JK, Dana 30 Reverse and Dana 30 TJ. JK and TJ name axle versions, not vehicle fitment, so confirm the axle variant and spline count before ordering.
Check the axle variant (Standard, JK, Reverse or TJ) against your housing, and the 3.73 and up ratio against your gears. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An external air source is needed to operate the locker. Supply the air system before fitting the locker, and confirm the axle variant and gear ratio first.
What’s included
The locker and forged cover are included. An external air source is not included.









