Select your vehicle

Replacement O-Ring Set

ARB 4x4 Accessories

Shop ARB 4X4 Accessories Differentials on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Replacement O-ring set, sold as a pair (ARB part number ARB160248SP)
  • For ARB lockers RD166, RD167, RD168 and RD170
  • Matched to locker models RD166, RD167, RD168 and RD170
  • UPC 700007760091

Description

Overview

The ARB 4×4 Accessories Replacement O-Ring Set, sold as a pair under part number ARB160248SP, is a seal set for ARB lockers RD166, RD167, RD168 and RD170.

Key features

  • Sold as a pair
  • Fits ARB lockers RD166, RD167, RD168 and RD170
  • Replacement O-rings for the locker, not a complete locker
  • Sold as a pair, with the O-ring set matched to the four listed locker models

Locker seal care

O-rings are small parts that do a large job in a locker, keeping air and lubricant where they belong. Over time they can harden, flatten or split from heat and exposure to trail grime. When a locker is opened for service, inspect each seal for nicks, cracks and flat spots, and replace any that look compressed or brittle rather than reusing them.

Clean the grooves before fitting new seals, since a single grain of grit can open a leak path. Lightly coat each O-ring with the lubricant the service procedure requires, and avoid petroleum products on seals not made for them. Check that the set matches the locker model before disassembly, so the right parts are on the bench when the work begins.

  • Match the seal set to the locker model before starting
  • Clean every seal groove before reassembly
  • Replace O-rings that look flattened or split
  • Keep a spare set for trail repairs

Specifications

Brand ARB 4×4 Accessories
Part number ARB160248SP
UPC 700007760091
Quantity Sold as a pair
Compatible lockers RD166, RD167, RD168, RD170

Vehicle fitment

The set is matched to locker models RD166, RD167, RD168 and RD170, so fit depends on the locker model rather than the vehicle. Check your locker’s model number before ordering.

Lockers outside the RD166 to RD170 range are not on this list, so use a set that matches your locker’s model number.

What’s included

The set is sold as a pair. Check the package contents against your locker before installing.

SKU: ARB160248SP Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 4.00 × 4.00 × 1.00 in
brands

Questions & Answers

Which ARB lockers take the ARB160248SP O-ring set?

It fits ARB lockers RD166, RD167, RD168 and RD170. Confirm your locker's model number matches one of these before ordering, since other models need a different set.

Is the set sold as a single O-ring or a pair?

It is sold as a pair. Check the package contents before ordering to confirm how many O-rings each pair includes.

Can this O-ring set be used on other ARB lockers?

No, not on the lockers listed here. Only RD166, RD167, RD168 and RD170 are matched to this set. For any other locker model, confirm that the O-ring set matches your locker's model number before ordering.

How can I tell if the O-rings need replacing?

Look for cracks, flat spots, hardening or swelling when the seal is removed. Leaks after a locker service, or air loss around the locker housing, can also point to worn O-rings. Replace any seal that shows damage rather than reusing it.

Should I replace all the O-rings at the same time?

Usually yes when the locker is opened. Seals that wear at the same rate tend to fail together, and replacing the whole set keeps the rebuild consistent. Clean the grooves and check each seal before reassembly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop ARB 4X4 Accessories Differentials on Amazon