Overview
The Dana Spicer D/S708142 is an unloaded differential carrier for a Dana 35 standard differential. Unloaded means the carrier arrives without its internal gears installed, so it is the housing rather than an assembled gear set.
Dana Spicer describes its O.E. carrier assembly with all components new and built to factory specs. Part number D/S708142 is the only identifier listed.
Key features
- Unloaded carrier for a Dana 35 standard differential
- O.E. carrier assembly.
- Components are new
- Built to factory specifications.
Before you fit the carrier
A carrier is the centerpiece of a differential, holding the ring gear, pinion and side gears that transfer torque to the wheels. When you buy an unloaded carrier, the gear and bearing work becomes part of your job or your shop’s job, so plan that work before the carrier is ordered.
Gear contact, backlash and bearing preload all depend on shim thickness and careful setup, which is why many owners have a gear shop handle this stage. Also check that the axle type, pinion flange and ring gear size match the old carrier, since a mismatch can stop the axle from fitting the housing.
- Compare the ring gear size with the old carrier before buying
- Plan for new bearings, seals and a pinion nut when rebuilding
- Confirm the differential style matches the spool or locker you plan to use
- Keep the carrier clean and covered until it is installed
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S708142 |
| Axle type | Dana 35 |
| Differential type | Standard (Std.) differential |
| Carrier condition | Unloaded |
| Components | New components. |
Vehicle fitment
No vehicle is named, and Dana Spicer lists universal fit. The carrier is sized for a Dana 35 standard differential, so the axle type is the match point.
The Dana 35 is an axle, not a vehicle. Check your axle type and differential style against the part before buying. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An unloaded carrier needs its ring gear, pinion and differential internals fitted before it goes into the axle housing. An axle shop typically does this, because gear contact must be set correctly before the axle is put into service.
What’s included
The unloaded carrier only.
Not included: the internal gear set, since the carrier is unloaded.









