Select your vehicle

ARB Air Locker Differential – RD143

ARB 4x4 Accessories

Shop ARB 4X4 Accessories Differentials on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Air Locker differential RD143 for Dana 44 axles
  • Shaft spline 32 and shaft diameter 1.41 in
  • Suits all ratios of some late model Dana 44 axles, rated 3.73 and down
  • Part number ARBRD143 from ARB 4×4 Accessories

Description

Overview

The ARB Air Locker Differential RD143 is an air-operated locking differential for Dana 44 axles. It is built for performance applications, with a 32-spline shaft and a 1.41 in shaft diameter, and it suits gear ratios of 3.73 and down.

It is labeled Universal Fit, but the axle, not a vehicle model, decides whether it fits, so match the Dana 44 axle and ratio before installing.

Key features

  • Air-operated locking differential for Dana 44 axles
  • Performance application
  • Suits all ratios of some late model Dana 44 axles
  • Ratio rating 3.73 and down

Gear ratio and axle checks

A locker changes how torque reaches both wheels, so the rest of the axle has to handle it. Before fitting a locker, look at the ring and pinion, the carrier bearings and the axle shafts. A worn carrier can wear faster under a locked load, and a damaged gear set is easier to address while the cover is off.

Gear ratio matters as well. Lockers are most often paired with the ratios they are suited to, so keep the gear set within the rated range and avoid mixing ratios that were never meant to share an axle. A gear shop can check tooth contact and pinion depth before the cover goes back on.

Route the air lines away from the driveline, heat sources and sharp edges, and secure them so they cannot rub through. Check the fittings for leaks after the first drives and again after trail use.

Specifications

Brand ARB 4×4 Accessories
Part number ARBRD143
Application Performance
Axle Dana 44
Shaft spline 32
Shaft diameter 1.41 in
Ratio 3.73 and down
Fitment label Universal Fit

Vehicle fitment

Fit is set by the Dana 44 axle, and the unit suits all ratios of some late model Dana 44 axles. Confirm the axle housing matches your vehicle before installing.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A locker replaces the internals of an open differential, so the installation needs a qualified gear setup. Check the air supply lines for leaks after assembly.

What’s included

Check the package contents, including hardware, air fittings and carrier parts, against your installation before starting.

Questions & Answers

What axle does the ARB RD143 fit?

It is built for Dana 44 axles, and it suits all ratios of some late model Dana 44 axles. It is rated for a 3.73 ratio and down, so confirm your axle housing and gear ratio first.

Is the RD143 a universal fit differential?

It is labeled Universal Fit, but it is made for Dana 44 axles, so the axle decides fit and not the vehicle brand. Confirm your axle before installing.

What shaft spline and diameter does it use?

It uses a 32-spline shaft with a shaft diameter of 1.41 in. Compare those figures with your axle shafts before installing, since no vehicle years are named for this unit.

Does a locker need a gear setup check before fitting?

Often yes. A locker changes how torque reaches both wheels, so gear setup and carrier condition matter. Have a qualified gear shop check tooth contact and bearing condition before installing, especially when the axle is close to its rated ratio.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop ARB 4X4 Accessories Differentials on Amazon