Overview
Part OXLC825-273-27-AIR is a rear locking differential for a Chrysler 8.25-inch axle with 27 splines. It runs in two modes: open for smooth street driving and full spool for maximum available traction.
The unit goes from open to locked with the flick of a switch. It includes a forged differential cover with an integral air cylinder, which Ox Locker says makes operation smooth and reliable and keeps it serviceable. All components are fully machined in the U.S.A. The locker requires an external air source, which is not included.
Key features
- Open mode for smooth street driving
- Full spool mode for maximum available traction
- Flick-switch change between open and locked
- Forged differential cover with an integral air cylinder
- All components fully machined in the U.S.A.
Air system and daily use
An air-actuated locker depends on a steady, dry air supply, so the air system is as important as the differential itself. Plan the routing of air lines away from hot exhaust parts and moving suspension links, and secure them with clips so they cannot chafe. Fittings should be checked for leaks with a soapy solution after installation, since a small leak can make the locker slow to engage or release.
Moisture is the most common complaint with air lockers. A filter or a drain at the low point of the tank helps keep water out of the valve, and periodic draining keeps the system working as intended. Inspect the cover seal and the air cylinder during routine axle service, and check the solenoid wiring for corrosion. Locker engagement is easier to judge on a flat, low-speed surface before using it in rough terrain.
Specifications
| Brand | Ox Locker |
|---|---|
| Part number | OXLC825-273-27-AIR |
| Popular axle manufacturer | Chrysler |
| Axle location | Rear |
| Axle type | Chrysler 8.25 inch |
| Axle spline | 27 splines |
| Differential type | Selectable locker, air actuated |
| Air supply | External air source, not included |
Vehicle fitment
It is built for a rear Chrysler 8.25-inch axle with 27 splines, so match the axle size and spline count before ordering.
Match the axle type to the Chrysler 8.25 inch and the spline count to 27 splines. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Operating the locker requires an external air source, which is not included, so the air system needs to be supplied separately before installation.
What’s included
The locker and forged cover are included. An external air source is not included.








