Overview
The Ox Locker Dana 35 27 Spline 3.55 Up Air Selectable Locker, part number OXLD35-355-27-AIR, is an air-operated selectable locker for the rear Dana 35 axle with 27 splines and 3.55 and up gear ratios.
The locker operates in open mode for smooth street driving and switches to full spool for traction when it is needed. A switch changes the two modes, and the forged cover’s integral air cylinder supports smooth, reliable operation. The components are fully machined in the U.S.A. An external air source is required and is not included.
Key features
- Open mode for smooth street driving
- Full spool mode for the most traction available
- Switch change between the two modes
- Forged differential cover with an integral air cylinder
- Components fully machined in the U.S.A.
Matching the Dana 35 rear axle
The Dana 35 is a rear axle used in a range of older 4×4 builds, so the housing, axle shaft spline count and carrier size should be confirmed before a locker is chosen. A selectable locker changes how power splits between the wheels, which helps when one wheel loses grip, but it also means the axle parts see more load when fully locked.
Locked axles can make tight turns feel harder on pavement, so many drivers keep the locker open on street days and engage it on trails. Gear ratio and tire size also affect how the locker behaves, and a larger tire with a locked rear can strain the drivetrain. Check the axle shafts, bearings and gears for wear before installing the unit.
- Confirm the axle housing and spline count
- Inspect the gears and bearings before fitting
- Keep tire size in mind when setting gear ratio
Specifications
| Brand | Ox Locker |
|---|---|
| Part number | OXLD35-355-27-AIR |
| Popular axle manufacturer | Dana |
| Axle location | Rear |
| Axle type | Dana 35 |
| Axle spline | 27 splines |
| Gear ratio | 3.55 and up |
| Differential type | Selectable locker, air actuated |
| Air supply | External air source, not included |
Vehicle fitment
It is made for a rear Dana 35 axle with 27 splines. Confirm the axle type, spline count and 3.55 and up gear ratio before ordering.
Check the Dana 35 axle and the 3.55 and up ratio against your housing and gears. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The locker needs an external air source, which is not included. Supply the air system before fitting the locker, and check the gear ratio before installation.
What’s included
The locker and forged cover are included. An external air source is not included.









