Overview
The Oracle Lighting 5906-504 is a 35W HID CAN-BUS slim ballast for xenon HID headlight bulbs. It is a universal-fit part, not built for one vehicle. A ballast powers the xenon bulb, so it is a separate part from the bulb itself.
Oracle says its ASIC chip controller and integrated decoder circuit make the ballast compatible with any vehicle and can address fault indicator lights and bulbs flickering during operation.
Key features
- 35W CAN-BUS ballast design
- ASIC chip controller
- Integrated decoder circuit
- Real-time lamp monitoring and power compensation
- Full-time ballast protection circuitry
Wiring and bulb matching
A ballast regulates the high voltage that starts and runs a xenon arc, so it sits between the vehicle wiring and the bulb. CAN-BUS designs are meant to work with the vehicle’s electrical network, which helps reduce warning lights and flicker when a compatible bulb is fitted. The ballast is only half of the system, so the bulb type, base and harness all need to match before the lamp is switched on.
Before fitting, inspect the ballast wiring for chafing, heat marks and loose pins, and make sure the mounting spot allows air to move around the housing. Ballasts that run warm often fail early in a tight engine bay. If the lamp flickers or stays dark, check the bulb and connector first, because a faulty bulb can look like a ballast fault.
- Match the bulb type and base to the ballast before wiring
- Keep the connector dry and free of corrosion
- Check the fuse and ground point before the first start
- Re-check the wiring after the first few drives
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 5906-504 |
| Wattage | 35W |
| Type | HID ballast, slim |
| Bus compatibility | CAN-BUS |
| Controller | ASIC chip |
| Fitment | Universal fit |
Vehicle fitment
This ballast is a universal-fit part, so no vehicle list applies. Its ASIC chip controller and integrated decoder circuit are designed to suit a wide range of vehicles.
Confirm your headlights use HID bulbs before installing the ballast.
Installation notes
An HID ballast needs a fused connection and wiring to the xenon bulb, so use the correct harness for your bulb. Check local rules for headlight use on public roads before installing.
What’s included
Bulbs, harnesses and mounting hardware are not included with the ballast. Check the package contents against your installation before starting.









