Overview
The Oracle Lighting 7443 amber LED turn signal bulb, part number ORC5011-005, is a 7443 replacement built with 18 LED and 3-chip SMD (surface-mount device) technology. It is a universal-fit bulb, so it is not tied to one vehicle. Confirm that the socket in your turn signal housing takes a 7443 base before installing it.
It is designed as a direct replacement for the factory bulb, with brighter output than stock halogen and quick response when power is applied. The 5050 SMD chips are rated at 100,000 hours of continuous use. The bulb draws about 1/10th the power of the factory bulb while producing vibrant light.
SMD bulbs illuminate faster than incandescent bulbs, which Oracle says increases safety when they are used in tail lights. The amber color suits turn signal positions, and the same bulb can be used in brake, reverse and running light positions.
Key features
- Direct OEM-style replacement bulb for 7443 sockets.
- Quick-response LEDs that light faster than halogen filaments
- 5050 SMD chips rated at 100,000 hours of continuous use
- Draws about 1/10th the power of the factory bulb.
- Amber color for turn signal use
- Manufacturer warranty of 1 year
Flasher compatibility and care
Turn signal flashers were built around the current draw of incandescent bulbs. LEDs draw far less, so the flasher may read the circuit as a burned-out bulb and blink quickly. A load equalizer placed in the circuit gives the flasher the load it expects. Brake, reverse and running light positions usually do not need that step, but check the circuit before assuming.
Inspect the socket for corrosion or heat marks each time the bulb is changed, and replace a worn socket rather than forcing a new bulb into it. Mixing bulb brands in one circuit can change flash timing, so keep the pair matched.
- Confirm the flash rate after installation
- Clean the lens and check the socket seal
- Replace turn signal bulbs in pairs
- Watch the dash indicator for fast flashing
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORC5011-005 |
| Bulb type | LED |
| Bulb base | 7443 |
| Color | Amber |
| LED configuration | 18 LED, 3-chip SMD |
| Chip type | 5050 SMD |
| Chip rating | 100,000 hours of continuous use |
| Power draw | About 1/10th of the factory bulb |
| Warranty | 1 year |
| Fitment | Universal Fit |
Vehicle fitment
The bulb is universal fit, so no year, make or model is attached. Compatibility depends on the bulb socket, so check for a 7443 base in your turn signal housing.
Confirm your vehicle’s year, model and trim before ordering. Universal fit does not mean every socket uses the same base.
Installation notes
Turn signal circuits are where SMD bulbs most often cause trouble. The LEDs draw far less current than a halogen filament, so the flasher can run fast. Turn signal use needs a load equalizer to prevent rapid-flash. Brake, reverse and running light use does not need one.
Turn the lights off and let any warm housing cool before swapping the bulb.









