Overview
The Omix-ADA 16714.01 is a left hand thread wheel stud for front or rear hubs on early Willys and Jeep models. It fits the Willys MB, the Willys CJ-2 and the Willys CJ-3.
The stud is built to original specifications and comes with a limited five year warranty from Omix-ADA.
Key features
- Left hand threads
- Front or rear hub position
- Built to original specifications
- Limited five year manufacturers warranty
Replacing an old wheel stud
Left hand thread studs need matching left hand nuts, so the thread direction is the first thing to check. Forcing a right hand nut onto a left hand stud can strip the threads quickly. Remove the old stud by driving it out of the hub, and clean the bore before fitting the new one so it seats square.
Old studs often show wear as thread damage, stretching or a loose fit in the hub. Inspect neighboring studs at the same time, since a stud that has worked loose may have stressed the others. After installing a new stud, torque the nuts in a star pattern and recheck them after the first few drives, especially on rough road or trail use.
- Confirm thread direction before fitting
- Inspect the other studs in the hub
- Clean the bore before seating the new stud
- Recheck nut torque after the first drives
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16714.01 |
| UPC | 804314067519 |
| Thread direction | Left hand |
| Position | Front or rear |
Vehicle fitment
It fits the 1941–1942 Willys MB (Base), the 1946–1949 Jeep Willys CJ-2 and the 1949–1953 Jeep Willys CJ-3.
Models such as the CJ5, CJ7, Cherokee and Wrangler are absent from that list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the quantity before ordering.














