Overview
The Crown Automotive J5355719 is a factory style replacement wheel stud, and five are needed per axle. It is sold as universal fit, so no vehicle year, make or model is named. Compare its length and thread with your original stud.
Wheel stud care and inspection
Wheel studs take the clamping force of every lug nut, so they wear the same way the nut seat and hub face do. Inspect studs for stretching, bending, thread damage, and corrosion, especially after trail use or washing with pressure tools.
Factory style replacements aim to match the original’s length, thread, and head shape. Check each stud against the one it replaces, and do not mix studs of different lengths on the same hub, because uneven clamping can loosen a wheel.
When fitting, drive the stud fully into the hub flange so the shoulder seats flat, then tighten the nuts in a star pattern. Recheck the nut torque after the first short drive, and again after the next few drives.
- Replace stretched or bent studs
- Keep the same length on each hub
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5355719 |
| UPC | 848399063585 |
| Style | Factory style replacement |
| Quantity per axle | 5 required |
Vehicle fitment
The label reads Universal Fit, but no vehicle is named. Compare the stud with the factory original on your axle before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Five studs are needed per axle, so count the studs on the hub before fitting new ones.
What’s included
This is a wheel stud, so check the count supplied against the five needed per axle. Check the package contents against your installation before starting, including the lug nuts you will use.












