Overview
The Crown Automotive A474 is a right hand thread wheel stud sold as a hub stud bolt. It fits the front or rear hub on the driver or passenger side.
Crown Automotive makes and distributes replacement parts for Jeep vehicles. Match the thread direction and hub position against the stud you are replacing before fitting the A474.
Key features
- Right hand threads
- Usable on the driver or passenger side
- Front or rear hub position
- Replacement hub stud bolt under part number A474
Hub studs and thread direction
A hub stud bolt carries the wheel’s clamping load and holds the wheel and brake drum in position. Studs wear through thread damage, rust or bending, and a stud that has been struck or overtightened can fail under load. Replacing a worn stud restores the clamping force the wheel needs.
Thread direction matters. Many axles use left hand threads on one side and right hand threads on the other, so the replacement must match the stud it replaces. Remove the old stud carefully, clean the hub bore, and install the new stud with the brake components in their normal order.
- Match thread direction to the old stud
- Confirm front or rear hub position
- Clean the hub bore before installing
- Check the stud is fully seated
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | A474 |
| UPC | 848399050189 |
| Thread direction | Right hand |
| Position | Driver or passenger side, front or rear |
Vehicle fitment
It is a direct fit for the 1941–1942 Willys MB (Base) and the 1946–1949 Jeep Willys CJ-2.
Later CJ models and Wrangler models are not in that list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents when the stud arrives.









