Overview
The Crown Automotive JA000473 is a left hand thread wheel stud for Willys and early Jeep hubs. It fits the Willys MB, Willys M38 and M38-A1, Jeep CJ-2A, CJ-3A, CJ-3B, CJ-5, CJ-6, FC-150, FC-170 and C101 Commando, installed at the front or rear hub depending on the model.
Several entries depend on hub position and axle type. Some CJ-3B and CJ-5 front hubs apply only when the bearing is marked 18590, and CJ-5, CJ-6 and C101 rear hubs from 1966 to 1971 require tapered rear axle shafts. Check your hub and axle before ordering.
Key features
- Left hand threads
- Direct fit.
- Front or rear hub application, varying by model
- Covers Willys MB, M38, M38-A1 and early Jeep CJ and FC models
- Bearing marked 18590 requirement noted for certain CJ-3B and CJ-5 front hubs
Matching left hand studs
Left hand thread studs are common on early Willys and Jeep hubs, and they tighten in the opposite direction from standard studs. Before removing anything, confirm that the old stud has left-hand threads and note its position on the hub. Mixing directions on one hub can cause a stud to loosen as the wheel turns, so a quick check saves trouble later.
Older axles often show more wear than the wheel suggests. Inspect the hub face, the stud shank and the threads for galling, bent sections or stretched holes. Replace a stud that spins in the hub, and consider the bearing condition while the hub is off, because the two often wear together on older vehicles.
- Confirm thread direction before removing the nut
- Replace studs that show thread damage
- Check the hub bore for corrosion before reinstalling
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | JA000473 |
| UPC | 848399072976 |
| Thread direction | Left hand |
| Fitment type | Direct fit. |
| Hub position | Front or rear, by model |
| Bearing marker | 18590, for certain front hubs |
| Axle note | Tapered rear axle shafts required for CJ-5, CJ-6 and C101 rear hubs, 1966-1971 |
Vehicle fitment
It fits the 1941-1942 Willys MB, 1946-1949 Willys CJ-2, 1949-1958 Willys CJ-3, 1955-1958 Willys CJ-5, 1956-1958 Willys CJ-6, 1957-1961 Jeep FC150 and FC170, and 1959-1965 Jeep CJ5 and CJ6, with a 1959 CJ-3 entry. It also fits the M38 (1950-1952), M38-A1 (1952-1963), CJ-3A (1948-1953), CJ-3B (1953-1968), FC-150 (1956-1964), FC-170 (1957-1964) and C101 Commando (1966-1971).
It does not fit the Jeep CJ-7 or Wrangler YJ. Some year ranges vary by model, so confirm your vehicle’s year, model and trim before ordering.
Installation notes
The threads run left-handed, so the stud must match the thread direction of the hub it replaces. Front and rear hub applications differ by model, so identify your hub position first.
What’s included
One Crown Automotive JA000473 wheel stud is included. Check the package quantity against the number of hub studs you need before ordering.









