Overview
The Omix-ADA 18043.24 is a front left outer tie rod end for the 1974-1988 Jeep J10 and J20. It links the driver side knuckle to the pitman arm, carrying steering input from the steering box to the front wheel on that side.
Omix-ADA builds it as a direct OE replacement to the original specifications, which suits owners replacing a worn original end on an early J10 or J20.
Key features
- Front left outer position on the driver side
- Connects the driver side knuckle and the pitman arm
- Direct OE replacement built to original specifications
- Carries a limited five year warranty
Toe setting after replacement
On a front steering system the outer tie rod end is the adjustable link that sets toe, the small inward or outward angle of the front wheels. Replacing the end changes toe, so the new part needs an alignment check before the truck is driven far. Without it, the tires can scrub and wear unevenly within a short distance.
Older trucks often have worn steering components elsewhere, such as the pitman arm, drag link and idler arm. Look at those joints while the front end is raised. Replacing a single worn joint is reasonable, but a loose linkage will keep throwing off alignment, so check the whole system for play.
- Get alignment checked after installation
- Inspect the pitman arm and drag link
- Check the opposite outer end
- Keep the jam nut locked after adjustment
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18043.24 |
| UPC | 804314041311 |
| Position | Front left outer |
| Connects to | Driver side knuckle and pitman arm |
| Fitment type | Direct fit |
| Warranty | Limited five year warranty |
Vehicle fitment
It fits the 1974-1988 Jeep J10 (Base) and the 1974-1988 Jeep J20 (Base). Other Jeep generations and models fall outside its fit.
Other Jeep generations and models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the tie rod end sets toe, have the front alignment checked once the new part is in.
What’s included
One Omix-ADA front left outer tie rod end, part number 18043.24.









