Select your vehicle

Crown Automotive Cotter Pin – J8121392

Crown Automotive

$7.67In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 1:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Universal cotter pin for ball joints and tie rods
  • Front axle location, Dana 30 Standard or Dana 44 axles noted
  • Fits Cherokee SJ, Wagoneer SJ, Grand Wagoneer SJ and J10 and J20 trucks
  • Part number J8121392, UPC 848399066937

Description

Overview

The Crown Automotive J8121392 is a universal cotter pin for ball joints and tie rods on the front axle. Dana 30 Standard and Dana 44 axles are noted for it, and it is a small locking pin used to hold a castle nut in place.

It is a universal cotter pin for ball joints and tie rods on the front axle. It fits Jeep SJ and J-series truck models, and it is not a Wrangler part.

Key features

  • Universal design for ball joints and tie rods
  • Front axle location
  • Noted for Dana 30 Standard and Dana 44 axles
  • It fits Cherokee SJ, Wagoneer SJ and Grand Wagoneer SJ models.
  • It fits 1974–1988 J10 and J20 trucks.

Cotter pin installation habits

A cotter pin is a simple part, but it is the only thing keeping a castle nut from backing off under load, so its seating matters. The pin should pass cleanly through the stud and the nut slots, with both legs bent tightly around the nut face. Pins that are bent badly or reused after being straightened can work loose on rough roads.

When a castle nut does not line up with a hole, the usual fix is to tighten the nut slightly to the next slot rather than loosening it, which keeps the joint clamped. Checking the nut torque before and after the pin is fitted helps confirm the joint is seated.

  • Keep a few spare pins in the toolbox
  • Use the correct size for the stud hole
  • Check the nut again after the first few drives

Specifications

Brand Crown Automotive
Part number J8121392
UPC 848399066937
Product type Universal cotter pin
Use Ball joints and tie rods
Axle location Front
Axle type Dana 30 Standard or Dana 44
Fitment type Direct Fit

Vehicle fitment

The list includes 1974–1983 Jeep Cherokee (SJ), 1984–1991 Jeep Grand Wagoneer (SJ), 1974–1988 Jeep J10 and J20 trucks and 1974–1990 Jeep Wagoneer (SJ) models.

Wrangler and Gladiator models are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A cotter pin holds a castle nut, so use a new pin each time the joint is opened and bend its legs to lock the nut.

What’s included

Confirm the quantity you need against your installation before starting.

SKU: CROJ8121392 Category:

Specification

Shipping weight 51.23 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (SJ)1974–1983Base, Chief, Pioneer, S, Wide Track
Jeep Grand Wagoneer (SJ)1984–1991Base, Limited
Jeep J101974–1988Base
Jeep J201974–1988Base
Jeep Wagoneer (SJ)1974–1990Base, Brougham, Custom, Limited

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the J8121392 cotter pin universal?

Yes, it is a universal cotter pin for ball joints and tie rods. It fits the Jeep SJ and J-series truck models shown, so confirm it suits your joint before installing.

Does it fit Dana 30 or Dana 44 front axles?

It is for Dana 30 Standard or Dana 44 front axles. Verify year, model and trim against your vehicle before buying.

What is the part number and UPC?

The part number is J8121392 and the UPC is 848399066937. Use the part number to match this pin against the old one before installing.

Does it fit a Wrangler?

No. Wrangler models are not covered. It fits Cherokee SJ, Wagoneer SJ, Grand Wagoneer SJ and J10 and J20 trucks.

Can a cotter pin be reused?

A pin that has been straightened and bent again loses strength and should be replaced. Using a new pin each time the joint is opened helps the castle nut stay locked. Inspect the stud and nut for damage as well.

What should be done if the castle nut does not line up with the hole?

Tighten the nut slightly to the next slot rather than loosening it, since backing off can reduce clamping force. Once aligned, fit a new pin and bend its legs firmly around the nut face.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon