Overview
The Fabtech FTS20508 is an outer tie rod end for 2011 and 2012 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD trucks. It replaces PN FTS71005.
Fabtech positions this as a heavy duty outer end aimed at steering strength and service life. The fitment data marks it as Direct Fit, and the trims are listed by model below.
Key features
- Outer position
- Heavy duty design for steering strength and service life
- Replacement for Fabtech PN FTS71005
- It is a direct fit for the 2011 and 2012 Silverado and Sierra HD trucks.
Tie rod end wear signs
Tie rod ends take steering loads at the wheel, so play in the joint shows up quickly as wander, loose steering or a vague feel at highway speeds. Uneven or cupped front tire wear is another sign that toe is drifting, often because a joint has worn. Inspect the boot for tears, since grit that gets in shortens the life of the joint.
Tie rods are usually replaced as part of a steering check that also covers the ball joints, drag link and steering stabilizer, because worn parts around the same linkage can throw off a new end. After replacement, have toe set by an alignment shop and recheck the fasteners after the first drives. Driving on a worn end is not a good idea, so address the symptoms promptly.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS20508 |
| UPC | 674866035621 |
| Position | Outer |
| Replacement for | PN FTS71005 |
| Quantity | Single |
| Fitment type | Direct Fit |
Vehicle fitment
The list covers 2011 and 2012 Chevrolet Silverado 2500 HD and 3500 HD trucks in LT, LTZ and WT trims. For GMC, it covers Sierra 2500 HD in Denali, SLE, SLT and WT trims, and Sierra 3500 HD in SLE, SLT and WT trims.
Silverado and Sierra models outside the HD range and model years after 2012 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Once the end is in, an alignment shop should set toe to the factory specification.
What’s included
One outer tie rod end is included.







