Select your vehicle

Omix-ADA Tie Rod End – 18043.11

Omix-Ada

$19.99Usually ships within 2 to 3 days
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 2:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Left side tie rod end, driver side at the pitman arm
  • Part number OAI18043.11 from Omix-Ada
  • Fitment lists 1984–1990 Jeep Cherokee (XJ) models
  • Base, Chief, Laredo, Limited, Pioneer and Sport trims named

Description

Overview

The Omix-Ada tie rod end, part number OAI18043.11, is the left side tie rod end for the driver side at the pitman arm. It fits the 1984–1990 Jeep Cherokee (XJ) in Base, Chief, Laredo, Limited, Pioneer and Sport trims.

It is a left position part and a direct fit. It carries a limited five year warranty from Omix-Ada.

Key features

  • Left (driver side) position
  • Attaches at the pitman arm
  • Omix-Ada part number OAI18043.11
  • Covered by a limited five year warranty from Omix-Ada

Pitman arm end wear

The left side tie rod end connects the pitman arm to the steering linkage on the driver side. Because it moves with every steering input, its ball joint wears gradually, and the most common symptom is looseness at the wheel that gets worse on rough roads or during slow parking maneuvers.

When replacing one end, compare the other side for matching wear. Ends that have worn at similar rates on both sides are often replaced together to keep the steering balanced. Check the drag link and the sleeve adjustment too, since changing one end can alter toe and the centering of the steering wheel.

Taking time with the install pays off. Clean the taper on the pitman arm before fitting the new end so the stud seats fully, tighten the nut to the torque in the service manual, and fit a new cotter pin. After any work on the tie rod, get the front alignment checked so the wheel stays straight and tires wear evenly.

  • Compare the other side end for wear
  • Inspect the drag link and sleeve
  • Clean the pitman arm taper before fitting
  • Check toe after replacement

Specifications

Brand Omix-Ada
Part number OAI18043.11
Position Left (driver side)
Location At pitman arm
Fitment type Direct fit
Warranty Limited five year warranty from Omix-Ada

Vehicle fitment

Omix-Ada lists fitment for the 1984–1990 Jeep Cherokee (XJ) in Base, Chief, Laredo, Limited, Pioneer and Sport trims.

Check your year, model and trim against the 1984–1990 range before ordering, since other Cherokee years fall outside it.

What’s included

One left side tie rod end is included.

SKU: OAI18043.11 Categories: , ,

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–1990Base, Chief, Laredo, Limited, Pioneer, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is OAI18043.11 the driver side tie rod end?

Yes. It is the left position tie rod end for the driver side, attaching at the pitman arm in the steering linkage.

Does this fit a later Cherokee XJ?

It fits the 1984–1990 Jeep Cherokee (XJ), so later Cherokee XJ years fall outside that range. Confirm your model year against that range before ordering.

Which trims are covered?

The Jeep Cherokee (XJ) trims named are Base, Chief, Laredo, Limited, Pioneer and Sport. Trims outside that group are not confirmed, so check your trim before ordering.

Is there a warranty on this tie rod end?

Yes, it carries a limited five year warranty from Omix-Ada. Its written terms set the coverage, so review them before installing.

Should both tie rod ends be replaced together?

Often yes. Ends that have worn at similar rates on both sides can be replaced together, which keeps the steering balanced. If only one side is worn, check the other end for play before deciding.

What tools help when fitting a tie rod end?

A tie rod separator or pitman arm puller, a torque wrench, a new cotter pin and penetrating oil are the usual tools. Clean the taper before fitting so the stud seats fully and holds torque.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon