Overview
The Crown Automotive steering return hose, part number CRO52037645, is a left hand drive hose for the 1991–2000 Jeep Cherokee XJ. It fits the Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims.
A steering return hose carries fluid back toward the reservoir, so replacing a damaged one restores that path. This hose is a direct fit replacement for the XJ trims covered here.
Key features
- Left hand drive application
- Direct fit replacement for the listed Cherokee XJ trims.
- Fits 1991–2000 Cherokee XJ trims
- Part number CRO52037645 for matching the correct hose
Signs the return hose needs replacing
A steering return hose runs under pressure from the steering system back toward the reservoir. Heat, age and fluid exposure can soften the rubber, causing swelling, cracks or seepage at the crimped fittings. A hose that feels soft or spongy when the wheel is turned, or that leaves fluid drips under the front of the vehicle, needs inspection.
Routing matters as much as the hose itself. Keep the hose clear of the exhaust, moving linkage and sharp edges, and confirm it does not touch the tire at full steering lock. Secure it with the original clips so it stays in position and does not chafe against nearby parts.
- Look for swelling or soft spots along the hose
- Check crimped fittings for seepage
- Watch for chafing where the hose touches other parts
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO52037645 |
| Drive configuration | Left hand drive |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list shows this hose for the 1991–2000 Jeep Cherokee (XJ) in Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims.
Not covered: other Cherokee years, Grand Cherokee and Wrangler models, and right hand drive vehicles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Expect fluid to drain when the hose is disconnected, so have a catch pan and rags ready before you start.
What’s included
It is a hose only. Clamps, fittings and fluid are not included, so check the package contents against your installation before starting.









