Overview
The steering adjusting sleeve, part number CRO52088463AB, is positioned at the pitman arm. It fits the 1999–2004 Jeep Grand Cherokee WJ in Laredo, Limited, Overland, Special Edition and Sport trims.
Adjusting sleeves let a steering linkage rod be set to a specific length during assembly and alignment, which is why this sleeve is sold as its own part.
Key features
- Positioned at the pitman arm
- Adjusting sleeve design
- Direct fit for Grand Cherokee WJ trims.
- Fits Grand Cherokee WJ trims
Setting steering linkage length
An adjusting sleeve is a threaded tube with a clamp or jam nut at each end. Turning it lengthens or shortens the linkage rod, which sets the toe and centers the steering. The sleeve is usually set during alignment, so its job is less about regular driving and more about getting the front wheels pointed the right way.
Before you adjust a sleeve, check the other linkage parts, including the tie rod ends, ball joints and the pitman arm, because worn joints can make the alignment impossible to hold. Mark the starting position of the sleeve so you can return to it if needed. After adjusting, tighten the jam nuts and check the steering wheel is centered on a straight road.
- Count or mark thread turns before adjusting
- Inspect ball joints and tie rod ends for play
- Tighten jam nuts after the final setting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO52088463AB |
| Component | Steering adjusting sleeve |
| Position | At pitman arm |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list shows this sleeve for the 1999–2004 Jeep Grand Cherokee (WJ) in Laredo, Limited, Overland, Special Edition and Sport trims.
Not covered: other Grand Cherokee generations, including the ZJ, and Cherokee or Wrangler models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Setting an adjusting sleeve changes steering geometry, so have the front-end alignment checked after installation.
What’s included
The sleeve is the only item. Plan for clamps and jam nuts during installation if your setup needs them.









