Overview
The Crown Automotive J8136600 is a driver side tie rod end at the pitman arm. It fits vintage Jeep CJ3, CJ5, CJ6 and CJ7 models and Willys CJ-2, CJ-3, CJ-5 and CJ-6 vehicles.
It sits in the front position and has a right hand thread. It also fits the Scrambler and several early CJ variants, including the CJ5A and CJ6A.
Key features
- Driver side pitman arm end
- Right hand thread
- Front position
- It fits Jeep CJ3, CJ5, CJ6 and CJ7 models.
- It fits Willys CJ-2, CJ-3, CJ-5 and CJ-6 entries.
Pitman arm wear on CJs
The pitman arm end on an older CJ takes the full steering force from the box, so a worn joint here can make the steering feel vague in a way that is hard to pin down. Symptoms include play at the wheel, a clunk when turning from lock to lock and steering that drifts on uneven roads. Old boots and grease fittings are often long gone on these vehicles, so the joint should be checked by feel as well as by eye.
A right hand thread on the end means it tightens in the usual direction, but the thread should still be cleaned and checked for damage before fitting. Taper and thread condition at the pitman arm matter as much as the end itself.
- Clean the pitman arm taper before fitting
- Check the thread for crossing or damage
- Inspect the drag link when the end is off
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8136600 |
| UPC | 848399072532 |
| Position | Front |
| Side | Driver side |
| Thread | Right hand thread |
| Location | At pitman arm |
| Fitment type | Direct Fit |
Vehicle fitment
Entries on the list are 1959–1966 CJ3, 1959–1983 CJ5, 1966–1968 CJ5A, 1959–1975 CJ6, 1966–1968 CJ6A, 1976–1986 CJ7, 1981–1985 Scrambler, 1946–1949 Willys CJ-2, 1949–1958 Willys CJ-3, 1955–1958 Willys CJ-5 and 1956–1958 Willys CJ-6.
Cherokee SJ, J-series trucks and the Wrangler YJ are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the pitman arm taper for wear before fitting the end, since this joint takes the steering load at that point.
What’s included
Check the package contents against your installation before starting, including any nut, boot or pin you need.









