Overview
The Omix-ADA 16755.02 (part number OAI16755.02) is an emergency brake return spring, adjusting end, for the Dana 18 and early Willys and Jeep CJ models.
It is built to the original specifications as a direct OE replacement and carries a limited five year warranty.
Key features
- E-brake return spring, adjusting end
- Dana 18 application
- Direct OE replacement
- Built to the original specifications
- Limited five year warranty.
Adjusting end and parking brake care
The e-brake return spring pulls the parking brake mechanism back to its released position after the lever or cable has been applied. On Dana 18 transfer cases and related Willys and Jeep CJ setups, a weak return spring can leave the shoes dragging or cause the lever to stay engaged. Because the spring works against the cable and linkage, check those parts whenever it is replaced.
Look over the adjusting end while the spring is off. Clean any rust and old grease, and check that the adjuster turns freely. A worn or seized adjuster can make the spring look fine while the brake still fails to release fully, so it is worth checking before the job is closed up.
- Check the cable and linkage for stiffness
- Make sure the adjuster turns freely
- Look for rust at the spring hook
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | OAI16755.02 |
| Product type | Emergency brake return spring |
| Position | Adjusting end |
| Application | Dana 18 |
| Warranty | Limited five year |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1959-1960 and 1966 Jeep CJ3, the 1959-1960 and 1966-1971 CJ5 and CJ6, the 1946-1949 Willys CJ-2, the 1949-1958 Willys CJ-3, the 1955-1958 Willys CJ-5, the 1956-1958 Willys CJ-6 and the 1942 Willys MB. Confirm fit for your vehicle’s year, model and trim before ordering.
Later CJ years are not on the list. Confirm your vehicle’s year, model and trim before ordering.











