Overview
The Omix-ADA Dana 18 transfer case gasket, part 18603.54, is a direct OE replacement for the Dana 18 transfer case. It seals the joint from the brake backing plate to the transfer bearing cap. It fits many Jeep CJ, J-series and Willys models from 1941 to 1971.
It is built to original specifications and backed by a limited five year warranty. Because it sits between brake and transfer case parts, the job involves more than one assembly.
Key features
- Direct OE replacement for the Dana 18 transfer case
- Positioned between the brake backing plate and the transfer bearing cap
- Part number 18603.54 with UPC 804314065850
- It fits many Jeep and Willys models from 1941 to 1971.
Signs the gasket needs replacing
Transfer case gaskets wear with heat cycles and age, and a leak often shows up as oil or grime collecting along the seam where two housings meet. On an older Dana 18 this area sits close to brake parts, so a leak can be mistaken for another drip. Check the old gasket for flattened, torn or hardened sections before deciding it is still usable, and look at the mating surfaces for pitting or old sealant residue.
When you open the joint, scrape old material gently so the metal is not gouged, and keep debris out of the bearing area. Use sealant only where the service procedure calls for it, since excess can push into the case. Tighten fasteners evenly in the sequence the service procedure gives, then recheck for leaks after a short drive.
- Oil or grime along the housing seam
- Hardened, torn or flattened gasket material
- Pitted or uneven mating surfaces
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18603.54 |
| UPC | 804314065850 |
| Transfer case | Dana 18 |
| Position | Brake backing plate to transfer bearing cap |
| Warranty | Limited five year manufacturer warranty |
| Fitment years | 1941–1971 |
Vehicle fitment
It fits the Jeep CJ, DJ, FC, J-series and Gladiator models and the Willys CJ-2, CJ-3, CJ-5, CJ-6, MB and Panel models from 1941 to 1971, mostly in Base trim.
Wrangler, Cherokee and Grand Cherokee models and CJ models from 1972 and later fall outside this gasket’s year range. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The gasket sits between brake and transfer case parts, so plan the disassembly in order and keep the mating surfaces clean. Compare the old gasket with this one before fitting.
What’s included
One Dana 18 transfer case gasket, part 18603.54. Check the package contents against your installation before starting.









